IPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC295] Inverter Changeover Control for an Open-end Winding Motor
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
-
[RTML-061] PMSM/IPM Constant rating 100(kW) 3-phase, Open-End Winding
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 259(mm) | Voltage/Current: DC350(V)/400(A) | Rotor: IPM
-
[W-OP-165] Solving Geometry Conflicts in GA Optimizations with Large Numbers of Geometric Parameters
Genetic Algorithm (GA) based optimization with finite element analysis is expected to become a solution for high performance motor designs which need to satisfy many strict requir…
-
[W-MB-181] Validation of JMAG-RT Spatial Harmonic Model Accuracy: Comparison of Differential Equation Models, Integral Method Models, and FEA
JMAG-RT generates models that can simulate nonlinear motor characteristics for use in control circuit designs done with software-in-the-loop (SIL), hardware-in-the-loop (HIL), and…
-
Best of Bosch – The Computational Concerto Orchestrating Finite Element Analysis, Network Methods, and Machine Learning
Stefan KURZ, Robert Bosch GmbH
-
Magnetic, Thermal and Vibration Evaluation of Permanent Magnet Synchronous Motor Considering High Frequency Component of Electric Current by PWM
Takeshi Hara, YANMAR HOLDINGS CO.,LTD.
-
Development of a Detailed 3D Eccentric eMotor Model for Electric Vehicle NVH Simulations
Jacob Krizan, Ford Motor Company
-
Investigation of the Effect on Electromagnetic Excitation Force Considering Dynamic Eccentricity in Ultra-High Rotation Motor
Takashi Maeda, ESTECH Corporation
-
H3X Integrated Motor Drives: Delivering World-Class Power Density for Maximum Vehicle Range
Max Liben, H3X Technologies
-
Coupled Optimization of Active and Passive Components in Electric Machines: Towards Performance, Efficiency, Reliability and EMC Objectives
Mohamed Essam Ahmed, AVL List GmbH
-
Model-Based Calibration Enables Optimal Torque Control of Synchronous Motors in a Short Time
Atsushi Katagiri, MathWorks Japan
-
1 : JMAG-Ansys-Optimus Electromagnetic Field-Structure Analysis 2 : AI and PIDO Integration -Fast non-parametric shape optimisation-
Mio Hashiba, CYBERNET SYSTEMS CO., LTD.
-
[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets
In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors
In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…
-
[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-
In this example, the effects on iron loss when the modulation method for PWM control is changed are evaluated.
