Axial Gap Type Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC317] Optimization via a Surrogate Model Using Materials as Design Variables
This case study runs a material optimization of an IPM motor that minimizes the iron losses and material costs to select the best core from three types of materials: electromagnet…
-
[JAC304] Thermal Analysis of an Axial Flux Motor Accounting for Cooling
This case study evaluates the temperature changes of each part of an axial flux motor with and without a cooling jacket during a WLTC drive cycle.
-
[JAC315] Torque Analysis of an Axial Gap Motor Using a Halbach Array
This case study sets the magnetization pattern for a Halbach array for a three-dimensional axial gap motor, and then compares it against a standard magnet arrangement. The results…
-
[JAC314] Torque Analysis of an SPM Motor Using a Halbach Array
This case study sets the magnetization pattern for a Halbach array to a two-dimensional SPM motor, and then compares it against a standard magnet arrangement. The results demonstr…
-
[JAC319] Design Exploration of an IPM Motor Using an Offline Optimization
This document introduces a process for an offline optimization run using a surrogate model to explore design solutions that satisfy the requirements in less time while also reduci…
-
[JAC308] Thermal Analysis of a Three-phase Induction Motor Accounting for Ventilation Cooling
This case study evaluates the temperature variations when using two different fans in an induction motor by taking into account the ventilation cooling.
-
[JAC307] Topology Optimization of SPM Motor Using the Magnet Orientation Direction as a Design Variable
This case study runs an optimization to simultaneously explore the magnet topology and orientation directions through design variables to obtain at least the same torque as a Halb…
-
[JAC305] Loss Analysis of IPM Motor During Driving Cycle Considering Temperature Variation
In this example, we evaluate the time variation of losses and temperature during WLTC driving cycles when using an efficiency map with temperature dependency in an IPM motor.
-
[JAC306] IPM Efficiency Map Analysis Accounting for Continuous Operation
In this example, we will create an efficiency map for an IPM motor that considers continuous operation and imposes temperature constraints on the components.
-
[JAC302] Optimization of IPM Motor Geometry and Coil Turns
This case study optimizes IPM motor geometry and coil turns by using objective functions to maximize the average efficiency of several operating points and minimize the volume to …
-
[JAC205] Analyzing the Torque Characteristics of IPM Motors Using a Thermal Equivalent Circuit
Here, we confirm a situation where temperature increases due to eddy current of the iron loss and magnet, which causes demagnetization of the magnet and torque reduction.
-
[JAC219] Axial Gap Type Motor Cogging Torque Analysis
In this example, presents an example of cogging torque analysis of an axial gap type motor.
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…
-
[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet
This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…
-
[JAC303] Geometry Optimization of a Motor Considering Vibration at System-level
In this document, the dimensional optimization of a single motor is performed to minimize the vibration at the system level.
-
[JAC267] IPM Motor Topology Optimization Using the Density Method
Magnetic field and structural coupled analysis is run in this example. While accounting for rotor core strength, topology optimization that uses the density method is used to perf…
