Model Operations

[S0068] Create a multiple face reference target and set it as the reference for the surface normal direction of a superconducting material

Create a multi faces selection reference target to specify the reference surface for material properties where the reference direction changes along a curved surface.

[S0066] Create a 2D geometry of an I-shaped IPM outer rotor

Create a 2D shape of the I-shaped IPM outer rotor as a 1/4 model with 8 poles.

[S0065] Create a 2D geometry of a stator with tapered slots

Create a 2D shape of the tapered-slot stator with 24 slots as a 1/4 model.

[S0061] Define cut planes of the model

Create a cut plane to view the results interior of the model.

[S0058] Create an ellipse shape in the Geometry Editor

Create an elliptical region with its center position, major radius, minor radius and major angle relative to the X-axis defined by equation variables.

[S0055] Create a beam in the Geometry Editor

Create a beam part with its start position and length defined by equation variables.

[S0054] Create a shell in the Geometry Editor

Create a shell solid part with its start position, width and height defined by equation variables.

[S0053] Create a helix solid in the Geometry Editor

Create a helix solid part with its start position, pitch, number of turns, helix radius and tube radius defined by equation variables.

[S0052] Create a torus solid in the Geometry Editor

Create a torus solid part with its center position, torus radius and tube radius defined by equation variables.

[S0047] Select faces oriented in the specified normal direction located within the cylindrical range

Specify a cylindrical region in the model coordinate space, then select faces within that region and match to the specified normal direction.

[S0046] Group the selected parts by specifying a box area

Select parts by specifying a box range in the model coordinate space and create a part group from the selected parts.

[S0044] Create a sphere solid in the Geometry Editor

Create a spherical solid part with its center position and radius defined by equation variables.

[S0039] Create a full model from a partial model using the assembly pattern feature

Load a CAD file prepared as a partial model and create a full model using assembly pattern features.

[S0037] Create a 2D shape of the I-shaped rotor of an IPM motor

Create the 2D shape of the I-shaped rotor of an IPM motor as a 1/4 model with 4 poles and mirror symmetry.

[S0032] Create a rectangular prism in the Geometry Editor

Create a solid part of a rectangular prism by specifying the length, width and height.

[S0006] Get the area or volume of a part with a specified name

Get the volume in 3D or the area in 2D of a part or parts group with specified name