Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-002] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[L-MB-186] System Integration and Verification Using High Accuracy Plant Models
In this case study, the detection of current anomalies was verified by simulating an open winding fault.
-
[L-MA-185] Virtual Prototyping Enables Immediately to Validate the Machine Performance
By prototyping and testing motors, design problems can be identified and rework in the mass production stage can be reduced. However, prototyping is costly and time consuming. The…
-
[L-HT-184] Cooling Performance Evaluation for Motor Magnetic Design
Industrial motors, especially those with high power density, must take the cooling performance into account even for the magnetic performance with cooling. To improve the magnetic…
-
Power Supply Technology Co., Ltd.
PST is a specialized manufacturer that develops, designs, manufactures and sells power supplies and magnet rolls. In this interview, we talk with the team from the PST MG Design S…
-
[L-VI-183] Evaluation of System-Level Vibration Caused by Motor Electromagnetic Forces and Torques
Motors are the power source that is incorporated into a system like eAxle, and the torque and electromagnetic force (excitation force) generated by the motor is transferred throug…
-
[JAC302] Optimization of IPM Motor Geometry and Coil Turns
This case study optimizes IPM motor geometry and coil turns by using objective functions to maximize the average efficiency of several operating points and minimize the volume to …
-
The Future of R&D and Design: What Can Electromagnetic Field Analysis and Artificial Intelligence Do for You?
Hajime Igarashi, Hokkaido University
-
Improvement of Motor Design Process through Topology Optimization and Parametric Multi-Objective Optimization
Hisayoshi Takeuchi, DAIHATSU MOTOR CO.,LTD.
-
Case Study of Data-driven Design in Electric Motor Development
Naoki Ohmura, IHI Corporation
-
Characteristic Analysis of 12/10 Switched Reluctance Motor Using Control Circuit Function of JMAG-Designer
Nozomu Takemura, Osaka University / LG Japan Lab Inc.
-
Effect of High Voltage System on Drive Motor Performance
Nathan Li, NIO Inc.
-
High Voltage IWM Lightweight Development
David Chu, FUKUTA ELEC. & MACH. CO, LTD.
-
Thermal Analysis of Traction Motors Using JMAG: A Case Study and Future Perspectives
Victor Rosa, Magna Powertrain
-
Large-scale Loss Analysis of Large Capacity Synchronous Motors and Comparison with Actual Measurements.
Kohei Matsuura, TMEIC Corporation
