JMAG-Express
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JFT195] The Use of Custom Geometry in JMAG-Express Using Auto Constraint
This tutorial describes the procedures to use geometry modeled in an external CAD software and evaluate the performance in JMAG-Express.
-
[JAC304] Thermal Analysis of an Axial Flux Motor Accounting for Cooling
This case study evaluates the temperature changes of each part of an axial flux motor with and without a cooling jacket during a WLTC drive cycle.
-
[JFT211] Parametric Analysis and Optimization in JMAG-Express Using Custom User Geometry
This tutorial describes the procedures to run a parametric analysis and optimization in JMAG-Express using two-dimensional geometry data created in external CAD software.
-
[L-SE-194] Many-Case Distributed Calculations: Performance of Large-Scale Optimization
Optimization with many design variables requires exploring a large design space, leading to increased computational cost. In these scenarios, leveraging distributed processing on …
-
[JFT209] Thermal Design in JMAG-Express Using Custom User Geometry
This tutorial describes the procedures to apply an analysis template for design scenarios to a model created in JMAG-Designer, and then run an evaluation of the motor performance.
-
[W-MU-204] Thermal Analysis Validation with Measurements for a Water-Cooled PMSM
To solve this problem, this paper adopts a method that combines the Finite Element Analysis (FEA) and a thermal equivalent circuit.
-
[JFT208] The Use of Custom Three-Dimensional Geometry in JMAG-Express
This tutorial describes the procedures to use three-dimensional geometry data modeled in an external CAD software to evaluate the performance in JMAG-Express.
-
[JFT140] Motor Design Using JMAG-Express
This tutorial describes the procedures for motor design using JMAG-Express.
-
High Voltage IWM Lightweight Development
David Chu, FUKUTA ELEC. & MACH. CO, LTD.
-
JMAG Thermal Analyses for Higher Efficiency in Cooling System Design During Motor Product Development
Manabu Kawaji, AISIN CORPORATION
-
[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress
In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…
-
[JFT185] Use of Custom Two-dimensional Geometry in JMAG-Express 23.0 and Later
This tutorial describes the procedures to evaluate radial gap motor performance in JMAG-Express using custom two-dimensional geometry data created in an external CAD software.
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature, Stress, and the Presence of Electric Breakdown
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
-
[JAC297] Geometry Optimization of a Wound-field Synchronous Motor Including Efficiency Map, Part Temperature, and Stress Evaluations
This case study runs a parametric optimization of a main automotive engine to maximize efficiency and torque while minimizing the temperature and stress as constraint conditions.
-
[L-MO-54] JMAG-Express Online
JMAG-Express Online is a Web service to support your motor design work anytime, anywhere.
-
Magnetic, Thermal and Vibration Evaluation of Permanent Magnet Synchronous Motor Considering High Frequency Component of Electric Current by PWM
Takeshi Hara, YANMAR HOLDINGS CO.,LTD.
