IPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-011] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 25(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque(N·m): 3.7
-
[RTML-010] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 27(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque(N·m): 3.6
-
[RTML-008] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 22(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque(N·m): 3.6
-
[RTML-007] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque(N·m): 3.6
-
[RTML-005] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 54(mm) | Height: 80(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque(N·m): 3.6
-
[RTML-004] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 54(mm) | Height: 77(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque(N·m): 3.6
-
[RTML-002] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque(N·m): 3.6
-
[RTML-001] PMSM/IPM Constant rating 1000(W) 3-phase
Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque(N·m): 3.6
-
[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation
In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…
-
[JAC037] Vector Control Analysis of an IPM Motor Using Control Simulator and the JMAG-RT
The purpose of this Application Note is to demonstrate how to import a JMAG-RT model to a control/circuit simulator after using the JMAG-RT to obtain the inductance spatial harmon…
-
[RTML-047] PMSM/IPM Constant rating 75(kW) 3-phase
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC239] Fault Analysis in an IPM Motor
In this example, we introduce the case study that simulate the fault of an IPM motor using JMAG-RT. The fault simulated in this case study is an open circuit fault which is caused…
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
Aiming for Further Improved High Power Density Motor
Masatsugu Takemoto, Okayama University
