Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC001] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note introduces a case example of how to obtain the current density distribution of an auxiliary conductor and its rotation speed versus torque characteristics.
-
[JAC009] Sound Pressure Analysis of a Loudspeaker
This Application Note presents how the frequency characteristics of sound pressure can be obtained using the constant Lorenz force on the voice coil, regardless of the frequency.
-
[JAC006] Analysis of the SR Motor Torque Ripple
This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC003] Analysis of a Permanent Magnet Brush Motor
This document introduces how the characteristics of the brush-type PM motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux de…
-
[JAC019] Analysis of the Centrifugal Force in an IPM motor
This Application Note presents examples of cases that obtain changes and stress distribution from the centrifugal force in the rotor.
-
Comparison to Measurements of Combined Simulation with RT Model of IPM Motor
Yukari Toide, Mitsubishi Electric Corporation
-
Practical Use of Connected Electro-circuit Simulation with Electromagnetic Analysis in the Development of Robot Actuator
Takeo Kishida, Sony Corporation
-
Dynamic Analysis of the PM stepping motor by behavior model and circuit simulator
Kaoru Miyazaki, SANYO Seimitsu Co.,Limited
-
Development of 2005 Model Year ACCORD Hybrid
Masaaki Kaizuka, Honda R&D Co., Ltd.
-
Motor Core Iron Loss Analysis Evaluating Shrink Fit and Stamping Effect
Keisuke Fujisaki, Nippon Steel Corporation
-
Model Based Control for IPMSM
Shigeo Morimoto, Osaka Prefecture University
-
Multi-objective Optimization of Electric Motor and its Driving Parameter using modeFRONTIER and JMAG-Simulink Co-simulation Model.
Asahiko Otani, CD-adapco JAPAN Co.,LTD.
-
Loss Analysis of Rotating Machines Considering Carrier Harmonics
Katsumi Yamazaki, Chiba Institute of Technology
-
Automatic and optimum design method of SPMSM
Kan Akatsu, Tokyo University of Agriculture and Technology
-
Improvement technique of Cogging Torque for PMSM
Hideo Dohmeki, Musashi Institute of Technology
