Electrostatic/Time Harmonic Electric (3D)
Show 1 to 7 of 7
[JAC131] Stray Capacitance Analysis of a Motor
This note presents the use of analysis to obtain the stray capacitance between an IPM motor’s coil and stator core, between its rotor core and stator core, and between the inner a…
[JAC196] Analysis of coil stray capacitance
This document introduces target on the helical coil, changes the distance between windings, and obtains stray capacitance that occurs in each coil.
[JAC197] Electric field distribution Analysis of a Electroplating
This document introduces will introduce the electric field distribution in a model with the negative pole geometry facing the positive pole that is not parallel but slanted.
[JAC249] Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes
In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.
[JAC250] Dielectric Heating Analysis of a High-Frequency Preheater with Roller Electrodes
In this example, a use case is presented where the influence of the pitch of roller electrodes on the temperature distribution of a material (tablets) is evaluated.
[JAC151] Insulation Evaluation Analysis of a Power Transformer
In this example, how to obtain the electric field intensity distribution when a lightning strike or short circuit occurs and the assumed maximum voltage is applied to the winding.
[JAC073] Analysis of the Capacitance of a Parallel Plate Capacitor
This Application Note explains how to use JMAG to calculate the capacitance when the dielectric material is air and when it is a high permittivity material, while obtaining the am…
Show 1 to 7 of 7