Response Characteristic Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[W-MB-155] Accuracy of 6-Phase Motor Plant Models for Detecting Faults at Disconnections
Multiphase motors have become widely used, and a fail-safe function can be realized by providing a system with redundancy.
-
[W-MB-152] Accuracy of Motor Plant Model Required for ECU testing
ECU testing is performed under various conditions from the normal to the abnormal system.
-
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
-
[JAC210] Torque Decoupling of In-out Magnet Coupling
This document, presents an analysis for finding holding torque and an analysis for transient response during torque decoupling.
-
[JAC252] Geometry Optimization of a Solenoid Valve
In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.
-
Challenges Moving from Static to Dynamic Analyses: The Merits of Introducing Transient Response Analysis
Toshihisa Akutsu, San-Eisha, Ltd.
-
Development of Control Circuit Model for Multi Injection Solenoid Valve Motion Prediction
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
[L-MB-32] Simulating Responsiveness of Electric Machinery During Control with High Accuracy Using a Direct Coupling Analysis
For machines requiring high-speed responsiveness for controllers such as solenoid valves and injectors, level of accuracy required in simulation have increased following the advan…
-
[JAC189] Response Characteristics Analysis of Injectors Accounting for Collision
For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…
-
Prediction of Solenoid Valve Motion by Magnetic Field – Fluid Two-Way Coupled Analysis
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
The design of magnetic circuit for magnetostrictive sensor
Hiroshi Matsumoto, System Research Group Fundamental Technology Research Div. YAMAHA MOTOR CO., LTD.
-
Attraction force analysis of a solenoid valve and system control simulation
Yusaku Suzuki, JSOL Corp.
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT
This note presents how JMAG-RT can be used to calculate attraction forces and coil inductance that varies with harmonic and current. The result is the JMAG-RT model used as a refe…
-
[JAC041] Positioning Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use the JMAG-RT to obtain the space harmonics and current dependency of the thrust and coil inductance and import them to a circuit/control s…
-
Promotion to Spread JMAG to Actuator Development and Applications
Hideyuki Watanabe, Keihin-corp.co.jp
