Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-007] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-005] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 80(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-004] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 77(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-002] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation
In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…
-
[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM
In this example, we determine the motor efficiency in relation to the field current for a WFSM when the motor output is kept constant.
-
[JAC037] Vector Control Analysis of an IPM Motor Using Control Simulator and the JMAG-RT
The purpose of this Application Note is to demonstrate how to import a JMAG-RT model to a control/circuit simulator after using the JMAG-RT to obtain the inductance spatial harmon…
-
[RTML-047] PMSM/IPM Constant rating 75(kW) 3-phase
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT
This Application Note presents how to use JMAG-RT to obtain the spatial harmonics and current dependency of the thrust and coil inductance, and import them to a circuit/control si…
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT
In this Application Note, after using JMAG-RT to obtain an SR motor’s torque and inductance characteristics, the JMAG-RT model is imported into a circuit/control simulator, voltag…
