Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew
This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…
-
[JAC023] Eccentricity Analysis of an IPM Motor
This Application Note presents how to obtain variations in electromagnetic force according to changes in the amount of rotor eccentricity.
-
Transition of IPMSM for Air-Conditioners, and a Future Trend.
Yuichi Yoshikawa, Motor Company Matsushita Electric Industrial Co.,Ltd.
-
Development of the In-wheel Multipolar SR motor for an Electric Vehicle based on Magnetic Circuit Method
Kenji Nakamura, Tohoku University
-
Magnetization Patterns and Motor Effeciency of the NEOQUENCH-DR
Takao Yabumi, Daido Steel Co., Ltd.
-
The Axial Air Gap Permanent Magnet Motor for Air Conditioners
Takushi Fujioka, FUJITSU GENERAL LIMITED
-
Comparing Coupled Analysis with Experimental results for IPMSM
Kan Akatsu, Tokyo University of Agriculture and Technology
-
[JAC016] Analysis of a Hybrid Stepper Motor
This document introduces how the detent torque and stiffness torque can be calculated for a hybrid stepper motor.
-
[JAC011] Pull-in/pull-out Analysis of a PM Stepper Motor Using a Control Simulator and the JMAG-RT
This note presents how JMAG-RT can be used to calculate holding torque and coil inductance that varies with current. The result is the JMAG-RT motor model used as a reference for …
-
[JAC002] Cogging Analysis of a PM Linear Motor
This note presents how to obtain cogging torque, a cause of thrust variation, and evaluate the thrust force and attraction force during drive.
-
[JAC001] Torque Characteristic Analysis of a Three Phase Induction Motor
This Application Note introduces a case example of how to obtain the current density distribution of an auxiliary conductor and its rotation speed versus torque characteristics.
-
[JAC009] Sound Pressure Analysis of a Loudspeaker
This Application Note presents how the frequency characteristics of sound pressure can be obtained using the constant Lorenz force on the voice coil, regardless of the frequency.
-
[JAC006] Analysis of the SR Motor Torque Ripple
This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC003] Analysis of a Permanent Magnet Brush Motor
This document introduces how the characteristics of the brush-type PM motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux de…
-
[JAC019] Analysis of the Centrifugal Force in an IPM motor
This Application Note presents examples of cases that obtain changes and stress distribution from the centrifugal force in the rotor.
