Linear Solenoid / Linear Actuator
Show 1 to 9 of 9
[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT
This note presents how JMAG-RT can be used to calculate attraction forces and coil inductance that varies with harmonic and current. The result is the JMAG-RT model used as a refe…
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
[JAC252] Geometry Optimization of a Solenoid Valve
In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.
[JAC242] Solenoid Valve Attractive Force Analysis Taking into Account Movable Part Motion
In this example, an example is presented where the influence on the electromagnetic force by the presence or absence of inclination is confirmed at each position of the movable pa…
[JAC245] Injector Control and Eddy Current Effects
In this example, an example of evaluating the difference in responsiveness of an injector when eddy currents are taken into account or not is presented.
[JAC189] Response Characteristics Analysis of Injectors Accounting for Collision
For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…
[JAC116] Operating Time Analysis of an Injector by Evaluating the Reduction in Eddy Currents
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents. The…
[JAC062] Attractive Force Analysis of a Solenoid Valve
This Application Note obtains the attraction force at each position of the movable core.
[JAC066] Operating Time Analysis of an Injector
This Application Note explains how to apply direct current voltage to a solenoid injector and obtain its response characteristics by accounting for effects from eddy currents.
Show 1 to 9 of 9