[W-MB-156] Improving Motor Plant Model Accuracy by Accounting for Harmonic Iron Loss

Because of the acceleration of the motor and the effect of the PWM drive, it is becoming more important to account for loss in order to improve accuracy even for analysis using mo…

• Applications: IPM Motor, Motor, and SPM Motor
• Physical Phenomena: Circuit / Control
• Technical Themes: Efficiency map and MBD

[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor

In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JFT147] Creating a Lookup Table Using Parametric Analysis

This document explains how to run parametric analysis in JMAG-Designer and register it as a lookup table for MATLAB.

[RTML-043] SRM_01 3-phase

Type: SRM | Max Power: 0.5(kW) | Stator(Outside Diameter): 160(mm) | Height: 75(mm) | Voltage: DC150(V) | Rotor/Mover: RM

• Applications: Motor and SR Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-050] PMSM/IPM 3-Phases Delta

Type: PMSM | Power: 150(W) | Stator(Outside Diameter): 112(mm) | Height: 65(mm) | Voltage/Current: DC24(V)/4(A) | Rotor/Mover: IPM

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver

Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM

• Applications: IPM Motor, Motor, and Resolver
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-048] WFSM_02

Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 6

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JFT133] System Loss Evaluations in System-Level Simulations

This document describes the method to output an efficiency map / loss map obtained with JMAG and using a circuit simulation to comprehend drive cycle system loss.

• Technical Themes: Efficiency map

[RTML-044] WFSM_01

Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-042] SynRM_01 3-phase

Type: SynRM | Max Power: 0.01(kW) | Stator(Outside Diameter): 150(mm) | Height: 37.5(mm) | Voltage/Current: DC288(V)/5(A) | Rotor/Mover: RM | Average torque: 0.8(N·m)

• Applications: Motor and Synchronous Reluctance Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-040] PMSM/SPM Constant rating 1(kW) 6-phase

Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53.4(mm) | Height: 37.5(mm) | Voltage/Current: DC100(V)/10(A) | Rotor/Mover: SPM | Average torque: 4(N·m)

• Applications: Motor and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

Case Study of Developing an IPM Motor Drive System with Model-Based Development (MBD) – Using JMAG-RT and HILS –

Daisuke Mitsuoka, Shimadzu Corporation

• Applications: IPM Motor and Motor
• Technical Themes: MBD

Fuel Consumption Simulations for Vehicles Equipped with HUB Bearings with Motor Generator (eHUB)

Mitsuo Kawamura, NTN Corporation

• Applications: IPM Motor, Motor, and SPM Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

Analysis of Multi-Degree-of-Freedom Spherical Actuators in JMAG

Hirotsugu Fusayasu, Panasonic Corporation

• Physical Phenomena: Magnetic Field

[JFT080] Direct Coupling between MATLAB/Simulink and JMAG

In this document, direct coupling between MATLAB/Simulink and JMAG is presented.

• Technical Themes: MBD

JMAG-RT Case Studies Using 3D Analysis

Natsumi Tamura, Mitsuba Corporation

• Applications: IPM Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: Large-Scale Processing and MBD