Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC247] Magnetic Circuit Optimization for Plastic Magnets in a Radial Magnetic Field

    In this example, a use case of magnetic circuit optimization in a metal mold with radial magnetic field orientation used for ring-shaped magnet production is presented.

  2. [L-OP-03] Multi-Objective Optimization with JMAG

    It is even possible to analyse the relationship between design variables and response values in a correlation graph by visualizing the design space from optimization calculation r…

  3. [L-OP-61] Smooth and robust optimization process in JMAG

    The optimization is indispensable in machines design. Especially the optimization must consider not only the magnetic design issues but also the mechanical and the thermal design …

  4. [L-OP-109] Exploration of New Ideas Using Topology Optimization

    The requirements for motor design are getting more advanced, satisfying torque ripple, line voltage limit, stress of core, as well as maximize the torque at low and high speeds. I…

  5. [JAC236] Magnetic Circuit Optimization for Plastic Magnets in an Axial Magnetic Field

    In this example, a use case is presented in which a magnetic circuit of a product-forming mold, in a magnetic field aligned with the mold’s main axis, is optimized, with the mold’…

  6. [JAC261] SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization

    In this example, a magnet is segmented into blocks and coercive force is defined. The coercive force of each block is calculated so that the induced voltage waveform approaches a …

  7. [JAC252] Geometry Optimization of a Solenoid Valve

    In this example, an example where the geometry of a solenoid valve is optimized using a multi-objective optimization algorithm is presented.

  8. [JAC258] Magnetic Shield Geometry Optimization

    In this example, a case study in which the geometry of a magnetic shield is optimized using topology optimization that uses a sensitivity analysis (density method) is presented. D…

  9. [JAC257] IPM Motor Topology Optimization

    In this example, rotor core maximum stress and radial direction maximum displacement in the radial direction are set to certain values or less, and rotor geometry is designed that…

  10. [L-OP-34] Using MATLAB’s Optimization Engine in JMAG

    MATLAB is widely used in the engineering field, and the MATLAB Global Optimization Toolbox is often used for optimization calculations also.

  11. [W-OP-96] Necessity of GA for Multi-Objective Optimization of Drive Motor

    In this paper, the multi-objective optimization calculation has 12 design variables (8 geometric variables, 4 circuit variables) with 6 objective functions (maximize torque, minim…

  12. [JAC233] Induction Heating Coil Optimization

    In this example, an example of using an optimization function to design a coil to use for induction hardening a gear is presented.

  13. [JAC268] SPM Motor Teeth Geometry Topology Optimization

    In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…

  14. [JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation

    In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…

  15. [JAC267] IPM Motor Topology Optimization Using the Density Method

    Magnetic field and structural coupled analysis is run in this example. While accounting for rotor core strength, topology optimization that uses the density method is used to perf…

  16. [W-OP-166] Sensitivity Study of Configuration of Large Scale Multi-Objective Optimization of a PMSM

    The feasible solution space of large scale multi-objective optimization schemes is sensitive to the configuration (population size, objectives, constraints, and design variables).

Search Filter

  • All Categories

Remember me
Sign In
Create an account (Free) About authentication ID for JMAG website