DP
Transient Magnetic (2D/Axisymmetric)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC215] Simulation of an IPM Motor with a Delta Connection Using a Control Simulator and JMAG-RT
In this example, a JMAG-RT model is incorporated into a control/circuit simulator to monitor the circulating current when an IPM motor is being driven.
-
[JAC138] Vibration Analysis of an SR Motor
This Application Note presents an example of how to obtain the electromagnetic force generated in the stator core of an SR motor and evaluate the sound pressure by linking it to t…
-
[JAC223] Multi-Objective Optimization of an IPM Motor Account Stress at High-Speed Rotation
In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…
-
Electric Pump Vibration Analysis (Establishment of the Magnetic Field-Structural Coupled Analysis Method)
Takafumi Seki, Panasonic Corporation
-
Vibration Prediction of Permanent Magnet Synchronous Motors by Aid of JMAG
Toru Mizota, YANMAR HOLDINGS CO., LTD.
-
Optimal Design of Instantaneous High-output Motor for Basketball Robots
Yoshihiro Okumatsu, TOYOTA MOTOR CORPRATION
-
EV IPM Motor Continuous Operation Loss Evaluation Based on Hysteresis Play Model
Marin Vulic, Rimac Automobili d.o.o.
-
Application of Automation of Design Utilizing Optimization to Traction Motor
Tomoya Ueda, NIDEC CORPORATION
-
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: IPM (Vshaped) | Average torque(N·m): 23
-
[JFT065] Obtaining Part Face Area and How to Set Conditions
This document explains how to set current values for a coil area.
-
[JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations
This document describes the method for using the functions useful in searching parameter ranges that reduce geometry collapse during optimization calculations.
-
[JFT148] How to Set an Electrical Component for Each Wire Using Winding Editor
In this document, the difference in the connection status of the circuit wire by selecting/clearing in the optional function of Winding Editor is checked.
-
[JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode)
This document describes how to create efficiency map studies (accuracy priority mode) using a JMAG-Designer efficiency map study (speed priority mode).
-
[JFT150] Running Calculations of Multiple Studies Connected on Circuits
This documents explains the procedures on how to run analysis of multiple FEM analysis connected on circuits in JMAG-Designer.
-
[JFT153] Topology Optimization Calculations Using CNN Surrogate Models
This document describes as the workflow for topology optimization calculations using CNN surrogate models running topology optimization for creating a CNN surrogate model, creatin…
-
[JFT146] Optimization Calculation Using Surrogate Models
This document describes as the workflow for optimization calculations using surrogate models creating training data, creating the sample case, and using a surrogate model in runni…