Iron Loss Calculation
[JAC235] Reactor Core Stray Loss Analysis
In this example, reactor core stray loss is described.
[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss
In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…
EV IPM Motor Continuous Operation Loss Evaluation Based on Hysteresis Play Model
Marin Vulic, Rimac Automobili d.o.o.
[RTML-019] PMSM/IPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 185(mm) | Height: 37(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: IPM (Vshaped) | Average torque(N·m): 23
[JAC278] Creating Six-Phase Induction Motor Efficiency Maps
In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
[JAC228] Induction Motor Thermal Analysis
In this example, evaluating induction motor temperature distribution.
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
[JFT134] Inheritance Between Current Waveform Studies
This document describes the method for setting a current waveform obtained from a 2D analysis to a 3D analysis automatically by using a post calculation script.
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
[JAC260] Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
[JFT123] Accounting for Residual Strain
This document explains the procedure for executing magnetic field analysis and iron loss analysis that account for residual strain.
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
[RTML-036] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 400(mm) | Height: 63(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 179
[RTML-035] PMSM/IPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 400(mm) | Height: 81(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: IPM(flat) | Average torque(N·m): 179