JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM
In this example, we determine the motor efficiency in relation to the field current for a WFSM when the motor output is kept constant.
-
[JFT173] Workflow and Key Points in Efficiency Map Analysis
It is intended for intermediate-level users who are able to use technical references to improve accuracy and efficiency of their analysis. Therefore, basic information and detaile…
-
[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation
In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…
-
[JFT170] Distributed Processing Using JMAG-RemoteSystem
This document describes how to distribute the execution of multiple cases using the JMAG-RemoteSystem.
-
[L-HU-168] Fast Solving of Large Scale Model Using Massive Parallel Processing
One option for accurate loss analysis is 3D analysis. However, the number of elements often reaches into the millions, limiting its use in terms of calculation cost. In order to i…
-
[L-MU-169] Comparing Thermal Circuit Modeling with Experimental Result for an Axial Gap Motor
Comparison of a thermal circuit model with experimental results has been performed in this leaflet. In the thermal circuit, thermal characteristics of each parts are modelled by a…
-
[JAC288] Synchronous Reluctance Motor Topology Optimization
In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.
-
[JFT132] Simultaneous Parameter and Topology Optimization
This document describes the method for optimizing parameters and topology simultaneously.
-
[JAC126] Magnetization Analysis Accounting for Eddy Currents
This Application Note presents how to obtain the magnetization field distribution accounting for eddy currents in the magnetic material to be magnetized, the eddy current density …
-
[L-SE-163] High Performance Massive Case Calculations
Taking the traction motor, auxiliary motor, and reactor as models to be analyzed, presented in this report is the performance for simultaneously running 100 cases by using Power S…
-
[JFT015] Procedure for Direct Coupled Analysis with JMAG and STAR-CCM+ Taking Thermal Fluid into Account (Ver.22.0 and After)
This document presents the procedure for two way coupled analysis considering thermal fluid by using JMAG and STAR-CCM+.
-
[JAC253] Analysis of an Induction Generator
In this example, the relationship between the output power and efficiency of the induction generator is shown here.
-
[JFT182] Using User Geometry in JMAG-Express
This document describes the procedures to let you run performance evaluation in JMAG-Express by using geometry created with external CAD.
-
[JFT178] Customizing Display Items in the JMAG-Express View
This document describes the procedure for running parametric analysis with the JMAG-Express View using a generic model.
-
[JFT179] Simultaneous Multi-Case Execution from CUI on HPC/Cluster
This document describes the procedures for running multi-case calculations from the CUI of the calculation machine in environments where jobs cannot be directly submitted from the…
-
[JFT181] Using 2D CAD Data for Motor Design in JMAG-Express (Ver.22.1 and later)
This document describes the procedures for evaluating performance with JMAG-Express using geometry created from external CAD.