SPM Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[L-MB-30] Accurately Identifying Motor Characteristics During Control with JMAG-RT
In general, the characteristics of motor models used in control circuit simulation of a motor drive system are often assumed to be constant when the motor is in drive mode.
-
[RTML-036] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 63(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 179(N·m)
-
[RTML-033] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 400(mm) | Height: 51(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 176(N·m)
-
[RTML-030] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 179(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 178(N·m)
-
[RTML-027] PMSM/SPM Constant rating 100(kW) 3-phase
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 181(mm) | Voltage/Current: DC500(V)/400(A) | Rotor/Mover: SPM | Average torque: 178(N·m)
-
[RTML-024] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 24(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 22(N·m)
-
[RTML-021] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 27(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 23(N·m)
-
[RTML-018] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 82(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 23(N·m)
-
[RTML-015] PMSM/SPM Constant rating 10(kW) 3-phase
Type: PMSM | Max Power: 10(kW) | Stator(Outside Diameter): 115(mm) | Height: 83(mm) | Voltage/Current: DC240(V)/60(A) | Rotor/Mover: SPM | Average torque: 23(N·m)
-
[RTML-012] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 16(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.5(N·m)
-
[RTML-009] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 115(mm) | Height: 14(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
Design of a High-Density and High-Output Motor Using Optimization Analysis by GA
Koji Kokue, Tamagawa Seiki Co.,Ltd.
-
Simple Motor Vibration Prediction Method and Vibration Suppression Appropriate Analysis Case Study
Isamu Nitta, NSK Ltd.
