[JAC295] Inverter Changeover Control for an Open-end Winding Motor

This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: MBD

[JAC295] Inverter Changeover Control for an Open-end Winding Motor

DownloadVersionSize (KB)Model Data JMAG-Designer 23.112,636Case

[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress

In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…

• Applications: Motor and Wound-Field Synchronous Motor
• Module: ExpressFR
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: Efficiency map and Multiphysics

[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress

DownloadVersionSize (KB)Application Note -367Model Data JMAG-Designer 23.12,566Case

[JAC207] Transfer Torque and Efficiency Analysis of Magnetic Gear

In this example, the transfer torque and transfer efficiency are obtained with magnetic field analysis for the flux modulated type magnetic gear using permanent magnets for the in…

• Applications: Magnetic Gear
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC207] Transfer Torque and Efficiency Analysis of Magnetic Gear

DownloadVersionSize (KB)Application Note -1,088Model Data JMAG-Designer 22.15,054Case

[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors

DownloadVersionSize (KB)Application Note -515Model Data JMAG-Designer 22.2712Case

[JAC289] Efficiency Map Creation for Wound-Field Synchronous Motors

In this example, efficiency maps for a wound-field synchronous motor are created to check the combinations of currents that result in maximum efficiency. In addition, the loss bre…

• Applications: Motor and Wound-Field Synchronous Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency map

[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor

DownloadVersionSize (KB)Application Note -601Model Data JMAG-Designer 22.125,202Case

[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor

This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.

• Applications: Transformer / Reactor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)

DownloadVersionSize (KB)Application Note -770Model Data JMAG-Designer 13.0270Case

[JAC148] Loss Analysis of a Power Transformer (Flyback Converter)

A magnetic field analysis simulation based on the finite element method (FEM) can precisely evaluate the complex loss distributions of the coil and core, so it is optimal for an a…

• Applications: Transformer / Reactor
• Module: DP, LS, ST, and TS
• Physical Phenomena: Magnetic Field

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

DownloadVersionSize (KB)Application Note -1,344Model Data JMAG-Designer 22.02,527Case

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…

• Applications: IPM Motor and Motor
• Module: DP and ST
• Physical Phenomena: Magnetic Field and Material
• Technical Themes: Multiphysics

[JAC203] No-Load Test Analysis of Power Transformer

DownloadVersionSize (KB)Application Note -3,888Model Data JMAG-Designer 23.0789Case

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

DownloadVersionSize (KB)Application Note -651Model Data JMAG-Designer 22.02,960Case