TR
Transient Magnetic (3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC320] Voltage Characteristics Analysis of a No-Insulation NbTi Superconducting Coil
In this example, an NbTi superconducting magnet for an MRI machine that has a no-insulation structure that has a stabilizing layer with contact between turns and an insulation str…
-
[JAC304] Thermal Analysis of an Axial Flux Motor Accounting for Cooling
This case study evaluates the temperature changes of each part of an axial flux motor with and without a cooling jacket during a WLTC drive cycle.
-
[JAC316] AC Loss Analysis of a CORC Cable
This case study evaluates the changes in losses produced in CORC cables with different pitches by a transverse magnetic field.
-
[JAC315] Torque Analysis of an Axial Gap Motor Using a Halbach Array
This case study sets the magnetization pattern for a Halbach array for a three-dimensional axial gap motor, and then compares it against a standard magnet arrangement. The results…
-
[JAC310] Quench Characteristics Analysis of a Pancake Superconducting Coil
This case study evaluates a pancake superconducting coil to obtain the temperature and current density variations.
-
[JAC219] Axial Gap Type Motor Cogging Torque Analysis
In this example, presents an example of cogging torque analysis of an axial gap type motor.
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…
-
[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet
This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…
-
[JAC300] Electromagnetic Excitation Force Analysis of an SPM Motor with Step Skew
This case study runs a magnetic field analysis of an SPM motor with step skew to obtain the electromagnetic force acting on the teeth of the stator core to verify the electromagne…
-
[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor
This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.
-
[JAC010] Thermal Analysis of a Radiant Heater
This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…
-
[JAC251] Alternator Vibration Analysis
In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…
-
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
-
[JAC126] Magnetization Analysis Accounting for Eddy Currents
This Application Note presents how to obtain the magnetization field distribution accounting for eddy currents in the magnetic material to be magnetized, the eddy current density …
-
[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT
In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.
-
[JAC284] Analysis of Minute Electromagnetic Forces Acting on a Magnet
In this example, we obtain the minute electromagnetic forces acting on a magnet that is moving translationally.
