MATLAB/Simulink
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-057] IM Constant rating 1(kW)
Type: IM | Max Power: 1(kW) | Stator(Outside Diameter): 57.5(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/28.3(A) | Rotor/Mover: Cage
-
[RTML-058] IM Constant rating 10(kW)
Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 92.5(mm) | Height: 37(mm) | Voltage/Current: DC440(V)/200(A) | Rotor/Mover: Cage
-
[RTML-059] IM Constant rating 100(kW)
Type: IM | Max Power: 100(kW) | Stator(Outside Diameter): 125(mm) | Height: 259(mm) | Voltage/Current: DC600(V)/400(A) | Rotor/Mover: Cage
-
[RTML-060] IM Constant rating 100(kW)
Type: IM | Max Power: 100(kW) | Stator(Outside Diameter): 200(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/600(A) | Rotor/Mover: Cage
-
[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors
In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…
-
Model-Based Calibration Enables Optimal Torque Control of Synchronous Motors in a Short Time
Atsushi Katagiri, MathWorks Japan
-
Applied Cases of EV Motor Controller Tuning by MILS using JMAG-RT
Nobuo Morimura, SUBARU CORPORATION
-
Enabling Full EDU Optimization and Losses Analysis Under Different PWM Strategies and DC Voltages Employing Combined JMAG-MATLAB Simulation Environments
Nicola Rossi, Rimac Technology
-
[RTML-061] PMSM/IPM Constant rating 100(kW) 3-phase, Open-End Winding
Type: PMSM | Max Power: 100(kW) | Stator(Outside Diameter): 250(mm) | Height: 259(mm) | Voltage/Current: DC350(V)/400(A) | Rotor: IPM
-
[JAC295] Inverter Changeover Control for an Open-end Winding Motor
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…