[JFT153] Topology Optimization Calculations Using CNN Surrogate Models

This document describes as the workflow for topology optimization calculations using CNN surrogate models running topology optimization for creating a CNN surrogate model, creatin…

[JFT115] Recalculating Electromagnetic Force and Torque Waveforms

This document describes the method for calculating electromagnetic force as the post-processing of magnetic field analysis.

[JAC034] Demagnetization Analysis of an SPM Motor

This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.

• Applications: Motor and SPM Motor
• Physical Phenomena: Magnetic Field and Material

[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors

In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field
• Technical Themes: MBD

[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-

In this example, the effects on iron loss when the modulation method for PWM control is changed are evaluated.

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field

[JFT180] Topology Optimization Including Magnet Orientation Directions as Design Variables

This document describes the procedures for running topology optimization, including the magnet orientation directions as design variables.

[RTML-060] IM Constant rating 100(kW)

Type: IM | Max Power: 100(kW) | Stator(Outside Diameter): 200(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/600(A) | Rotor/Mover: Cage

• Applications: Induction Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-059] IM Constant rating 100(kW)

Type: IM | Max Power: 100(kW) | Stator(Outside Diameter): 125(mm) | Height: 259(mm) | Voltage/Current: DC600(V)/400(A) | Rotor/Mover: Cage

• Applications: Induction Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-058] IM Constant rating 10(kW)

Type: IM | Max Power: 10(kW) | Stator(Outside Diameter): 92.5(mm) | Height: 37(mm) | Voltage/Current: DC440(V)/200(A) | Rotor/Mover: Cage

• Applications: Induction Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-057] IM Constant rating 1(kW)

Type: IM | Max Power: 1(kW) | Stator(Outside Diameter): 57.5(mm) | Height: 20(mm) | Voltage/Current: DC100(V)/28.3(A) | Rotor/Mover: Cage

• Applications: Induction Motor and Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-056] WFSM_08

Type: WFSM | Max Power: 75(kW) | Stator(Outside Diameter): 400(mm) | Height: 65(mm) | Voltage/Current: DC500(V)/283(A), DC600(V)/50(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-055] WFSM_07

Type: WFSM | Max Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A), DC600(V)/45(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-054] WFSM_06

Type: WFSM | Max Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A), DC200(V)/20(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-053] WFSM_05

Type: WFSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 50(mm) | Voltage/Current: DC240(V)/84.8(A), DC300(V)/35(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[RTML-052] WFSM_04

Type: WFSM | Max Power: 10(kW) | Stator(Outside Diameter): 185(mm) | Height: 40(mm) | Voltage/Current: DC240(V)/84.8(A), DC300(V)/50(A) | Rotor/Mover: WF | Number of Phases: 3

• Applications: Motor and Wound-Field Synchronous Motor
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC273] Creating IPM Motor Efficiency Maps Accounting for AC Loss

In this example, an IPM motor efficiency map that accounts for AC loss from a PWM is created, and a comparison with an efficiency map that does not account for AC loss is performe…

• Applications: IPM Motor and Motor
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency map