SPM Motor

Sort condition
Newest first
Oldest first
Views
  1. [JAC274] SPM Motor Thermal Demagnetization Analysis Using Bonded NdFeB Magnets

    In this example, an SPM motor thermal demagnetization analysis is performed using bonded NdFeB magnets. Both the influence on torque waveforms when changing rotor magnet temperatu…

  2. 268 – SPM Motor Teeth Geometry Topology Optimization

    In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…

  3. 230 – 6-Phase SPM Motor Inverter Fault Simulation

    In this example, a JMAG-RT model of a 6-phase SPM is loaded into a control/circuit simulator, and circuit simulation for an inverter failure is carried out.

  4. Fuel Consumption Simulations for Vehicles Equipped with HUB Bearings with Motor Generator (eHUB)

    Mitsuo Kawamura, NTN Corporation

  5. 261 – SPM Motor Magnet Coercive Force Optimization For Obtaining Sinusoidal Magnetization

    In this example, a magnet is segmented into blocks and coercive force is defined. The coercive force of each block is calculated so that the induced voltage waveform approaches a …

  6. [RTML-036] PMSM/SPM Constant rating 100(kW)

    Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 400(mm) | Height: 63(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 179

  7. [RTML-033] PMSM/SPM Constant rating 100(kW)

    Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 400(mm) | Height: 51(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 176

  8. [RTML-030] PMSM/SPM Constant rating 100(kW)

    Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 250(mm) | Height: 179(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 178

  9. [RTML-027] PMSM/SPM Constant rating 100(kW)

    Type: PMSM | Max Power: 100k | Stator(Outside Diameter): 250(mm) | Height: 181(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 178

  10. [RTML-024] PMSM/SPM Constant rating 10(kW)

    Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 185(mm) | Height: 24(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 22

  11. [RTML-021] PMSM/SPM Constant rating 10(kW)

    Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 185(mm) | Height: 27(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 23

  12. [RTML-018] PMSM/SPM Constant rating 10(kW)

    Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 115(mm) | Height: 82(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 23

  13. [RTML-015] PMSM/SPM Constant rating 10(kW)

    Type: PMSM | Max Power: 10k | Stator(Outside Diameter): 115(mm) | Height: 83(mm) | Voltage/Current: DC500(V)/200(A) | Rotor/Mover: SPM | Average torque(N·m): 23

  14. [RTML-012] PMSM/SPM Constant rating 1000(W)

    Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 16(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque(N·m): 3.5

  15. [RTML-009] PMSM/SPM Constant rating 1000(W)

    Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 115(mm) | Height: 14(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque(N·m): 3.6

  16. [RTML-006] PMSM/SPM Constant rating 1000(W)

    Type: PMSM | Max Power: 1k | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque(N·m): 3.6

Search Filter

  • All Categories