Axial Gap Type Motor
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC304] Thermal Analysis of an Axial Flux Motor Accounting for Cooling
This case study evaluates the temperature changes of each part of an axial flux motor with and without a cooling jacket during a WLTC drive cycle.
-
[JAC315] Torque Analysis of an Axial Gap Motor Using a Halbach Array
This case study sets the magnetization pattern for a Halbach array for a three-dimensional axial gap motor, and then compares it against a standard magnet arrangement. The results…
-
[JAC314] Torque Analysis of an SPM Motor Using a Halbach Array
This case study sets the magnetization pattern for a Halbach array to a two-dimensional SPM motor, and then compares it against a standard magnet arrangement. The results demonstr…
-
[JAC308] Thermal Analysis of a Three-phase Induction Motor Accounting for Ventilation Cooling
This case study evaluates the temperature variations when using two different fans in an induction motor by taking into account the ventilation cooling.
-
[JAC307] Topology Optimization of SPM Motor Using the Magnet Orientation Direction as a Design Variable
This case study runs an optimization to simultaneously explore the magnet topology and orientation directions through design variables to obtain at least the same torque as a Halb…
-
[JAC219] Axial Gap Type Motor Cogging Torque Analysis
In this example, presents an example of cogging torque analysis of an axial gap type motor.
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…
-
[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet
This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…
-
[JAC241] Single-Phase Synchronous Motor N-T-I Characteristics Analysis
In this example, a use case in which the N-T-I characteristics for a single-phase synchronous motor are obtained is presented.
-
[JAC298] Analysis of an SPM Motor Taking into Account the Effects of Layer Shorts
OverviewDeterioration in the coil insulation may cause a short circuit between adjacent coil layers (layer short). A short-circuit current flowing when the winding has a layer sho…
-
[JAC300] Electromagnetic Excitation Force Analysis of an SPM Motor with Step Skew
This case study runs a magnetic field analysis of an SPM motor with step skew to obtain the electromagnetic force acting on the teeth of the stator core to verify the electromagne…
-
[JAC038] Starting Performance Analysis of a Single Phase Induction Motor
The purpose of this Application Note is to introduce an example of a single phase induction motor that uses a capacitor to set up an auxiliary winding and show its rotation speed …
-
[JAC034] Demagnetization Analysis of an SPM Motor
This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.
-
[JAC291] Control Simulation of Switching Number of Poles in a 6-Phase Induction Machine
In this document, the behavior of a 6-phase induction motor during the switching of the number of poles is evaluated by simulation.
-
[JAC227] Circuit Control Simulation for Three-Phase Induction Motor
In this example, we conduct a circuit simulation to control current and speed by incorporating the JMAG-RT model of an induction motor into the control/circuit simulator.
-
[JAC285] Integrated Magnetization Analysis of an SPM Motor by Magnetizing Multiple Times
In this example, the magnets are magnetized more than once with the rotor at different positions to evaluate the magnetization distribution in the magnets while also accounting fo…
