[JAC040] Cogging Torque Analysis of an SPM Motor

This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet

This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…

• Applications: Motor and SPM Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew

DownloadVersionSize (KB)Application Note -1,304Model Data JMAG-Designer 11.05,292Case

[JAC029] Iron Loss Analysis of an SPM Motor with Overhanging Magnet

DownloadVersionSize (KB)Application Note -670Model Data JMAG-Designer 17.03,584Case

[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet

DownloadVersionSize (KB)Application Note -594Model Data JMAG-Designer 15.01,432Case

[JAC026] Braking Torque Analysis of an Electromagnetic Brake

This Application Note shows how to obtain the braking torque of an electromagnetic brake during drive.

• Applications: Electromagnetic Brake
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC027] Head Field Analysis of a Recording Write Head That Accounts for Eddy Currents

DownloadVersionSize (KB)Application Note -634Model Data JMAG-Designer 12.03,466Case

[JAC024] Cogging Torque Analysis of an SPM Motor with a Skewed Stator

This note presents the use of magnetic field analysis to evaluate the cogging torque of an SPM motor with a skewed stator.

• Applications: Motor and SPM Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC025] Analysis of a Claw Pole Alternator

DownloadVersionSize (KB)Application Note -958Model Data JMAG-Designer 12.03,492Case

[JAC025] Analysis of a Claw Pole Alternator

This Application Note presents the use of an electromagnetic field analysis to evaluate the output capacity of a claw pole alternator operating at 1500 rpm while accounting for ed…

• Applications: Generator
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC031] Iron Loss Analysis of an SPM Motor Including the Effect of Press-fitting Stress

This note presents the use of the press fit condition to model a core and frame and obtains iron loss density for when the generated stress is used and not used.

• Applications: Motor and SPM Motor
• Module: DP, DS, and LS
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Multiphysics

[JAC040] Cogging Torque Analysis of an SPM Motor

DownloadVersionSize (KB)Application Note -402Model Data JMAG-Designer 17.02,250Case

[JAC041] Positioning Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

DownloadVersionSize (KB)Application Note -475Model Data JMAG-Designer 11.0PSIM 9.0.4876Case

[JAC045] High-Frequency Induction Heating Analysis of an IH Cooking Heater

DownloadVersionSize (KB)Application Note -1,279Model Data JMAG-Designer 12.03,007Model Data Abaqus 6.10-25,608Case

[JAC045] High-Frequency Induction Heating Analysis of an IH Cooking Heater

This Application Note shows how to obtain the magnetic flux density surrounding an IH cooking heater that uses high frequency induction heating and the temperature distribution of…

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC013] High-Frequency Induction Heating Analysis of a Shaft

This Application Note explains how to create a numerical analysis model and analyze the elevated temperature process in order to use the coil geometry and current conditions (powe…

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Multiphysics