Analysis Conditions

Sort condition
Newest first
Oldest first
Large number of views
  1. [JFT015] Procedure for Direct Coupled Analysis with JMAG and STAR-CCM+ Taking Thermal Fluid into Account (Ver.22.0 and After)

    This document presents the procedure for two way coupled analysis considering thermal fluid by using JMAG and STAR-CCM+.

  2. [JFT058] Creating Efficiency Maps Using JMAG-Designer (Speed Priority Mode)

    This document describes how to create efficiency maps using a JMAG-Designer efficiency map study (prioritizing speed).

  3. [JFT049] Grouping FEM Coil Conditions

    In this document, how to group FEM coil conditions and associate them with macro component wave windings is explained.

    • [JFT042] A Method for Obtaining a Steady-State Solution at an Early Stage (Time Periodic Explicit Error Correction)

      In this document, obtaining steady-state in less time steps using TP-EEC function will be presented.

      • [JFT033] Eccentricity Setting for Parallelly Moving the Motion Region Initial Location

        This document shows how to set the eccentricity to account for the moving part’s axis remaining parallel to the central axis while moving from the initial position and afterwards.

        • [JFT034] Eccentricity Setting for Parallelly Offsetting the Rotation Axis

          This document shows setting to move the rotation axis in parallel.

          • [JFT035] Eccentricity Setting for Inclining the Motion Region Axis

            This document shows setting to tilt the motion region axis.

            • [JFT036] Eccentricity Setting for Inclining the Rotation Axis

              This document shows setting to tilt the rotation axis.

              • [JFT102] Setting 3D Model Coils Using the Winding Editor

                This document explains methods for setting the coils of a 3D model using the winding editor.

                • [JFT137] Current Restraints using Conditional Branches of Equation

                  This document explains how to restrain current value that is fed into the coils when geometry and electric resistance change.

                  • [JFT129] Adding Efficiency Map (Speed Priority Mode) Response Values

                    This document describes how to use accuracy priority mode for operating point information obtained in speed priority mode.

                  • [JFT117] Parametric Analysis Method for Motors Possessing Wire Geometry with the Number of Poles and Slots as Design Variables

                    This document describes the method for performing wire geometry parametric analysis for motors with the number of poles and the number of slots as design variables.

                    • [JFT090] Iron Loss Analysis Using a Play Model and Lamination Analysis (Excess Eddy Current Loss Taken Into Account)

                      In this document, describes an analysis procedure for calculating iron loss using play model and lamination analysis that accounts for anomalous eddy current loss.

                    • [JFT087] Iron Loss Analysis Using Iron Loss Characteristics Data

                      In this document, describes an analysis procedure for calculating iron loss using iron loss characteristics data.

                    • [JFT089] Iron Loss Analysis Using a Play Model and Lamination Analysis

                      In this document, describes an analysis procedure for calculating iron loss using play model and lamination analysis.

                    • [JFT088] Iron Loss Analysis Using Iron Loss Characteristics Data (Isolation of Excess Eddy Current Loss)

                      In this document, describes an analysis procedure for the isolation of anomalous eddy current loss, and calculating iron loss using iron loss characteristics data.

                    Search Filter

                    • All Categories

                    Remember me
                    Sign In
                    Create an account (Free) About authentication ID for JMAG website