Magnetic Field
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-049] PMSM/IPM Constant rating 75(kW) 3-phase Resolver
Type: PMSM | Power: 75(kW) | Stator(Outside Diameter): 212(mm) | Height: 200(mm) | Voltage/Current: DC600(V)/250(A) | Rotor/Mover: IPM
-
[RTML-048] WFSM_02
Type: WFSM | Max Power: 2(kW) | Stator(Outside Diameter): 260(mm) | Height: 60(mm) | Voltage/Current: DC200(V)/20(A),DC100(V)/10(A) | Rotor/Mover: WF | Number of Phases: 6
-
[JAC113] Power Transmission Analysis of a Wireless Power Transfer System with Opposing Cores
This Application Note presents how to obtain the power transmission efficiency when the feeder wire’s position is moved in both the horizontal and vertical directions from a refer…
-
[W-MO-12] Comparative Evaluation of Synchronous Impedance of a 2D Model and a 3D Model
This case study makes the differences clear between 2D and 3D models by comparing the synchronous impedances obtained from the analysis results of 2D and 3D models, and shows that…
-
[W-SE-101] Detailed Eddy Current Analysis of End Winding with Parallel Processing
To accurately obtaining the end-winding eddy current loss at high rotation speed, the influence of the magnetic field flux generated by the eddy current flow in every part of the …
-
Soft Magnetic Composite Application Examples – Single Sided Axial Flux Machines –
The past decade has seen significant development in the field of soft magnetic composite (SMC) materials and their application in electrical machines. A large part of this can be …
-
[W-MB-66] Accuracy Improvements in the JMAG-RT Induction Machine Model
In this paper, improvements in the accuracy of induction machine plant models when applied to automobile drive motors are discussed.
-
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
-
[JAC210] Torque Decoupling of In-out Magnet Coupling
This document, presents an analysis for finding holding torque and an analysis for transient response during torque decoupling.
-
[JAC265] Creating Synchronous Reluctance Motor Efficiency Maps
In this example, the efficiency map of a synchronous reluctance motor is created with loss ratios at each operating point also evaluated.
-
[JAC276] Six-Phase IPM Motor Harmonic Iron Loss Analysis
In this example, confirming the effects of carrier harmonics on the iron loss of a six-phase IPM motor are explained here.
-
[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor
In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.
-
[JAC032] Analysis of a Transformer
In this example, the use of a magnetic field analysis to evaluate changes in the secondary voltage caused by load variations in a low frequency transformer.
-
[JAC260] Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
-
[JAC277] Vibration Analysis of Axial Gap-Type Motor
In this example, phenomena confirmed in axial gap-type motors that occur at maximum sound pressure level, from an electromagnetic excitation force and eigen mode perspective.
-
[L-OP-25] Utilizing JMAG in Cloud Services
More cloud services for CAE continue to be offered. This allows sufficient computational resources to be used when needed to perform analysis work.
