JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Re-consideration of E-machine Thermal Management Using Recent Capabilities of Numerical Simulation
Makoto Sato, Siemens PLM Software Computational Dynamics, K.K
-
[JFT065] Obtaining Part Face Area and How to Set Conditions
This document explains how to set current values for a coil area.
-
[JFT124] Searching for the Parameter Range Reducing Geometry Collapse During Optimization Calculations
This document describes the method for using the functions useful in searching parameter ranges that reduce geometry collapse during optimization calculations.
-
[JAC278] Creating Six-Phase Induction Motor Efficiency Maps
In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.
-
[JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode)
This document describes how to create efficiency map studies (accuracy priority mode) using a JMAG-Designer efficiency map study (speed priority mode).
-
[JFT154] Automatic Generation of Motor Thermal Analysis Model of Rotating Machine that Accounts for Cooling
This document shows how to run scripts from a JMAG project file with any model to create a thermal analysis model with batch settings of circuit components and each thermal condit…
-
[JFT150] Running Calculations of Multiple Studies Connected on Circuits
This documents explains the procedures on how to run analysis of multiple FEM analysis connected on circuits in JMAG-Designer.
-
[JFT151] Coil Creating Method Using Beams
This document explains how to calculate using line current conditions in magnetic field analysis.
-
TODA RACING Co., Ltd.
TODA RACING Co., LTD is focused on parts manufacturing, prototyping, and test stands mainly for racing.We continue to undertake challenges with the motto of "Transforming Automoti…
-
[JAC224] Wireless Power Transfer Device Stray Loss Analysis
In this example, an example is presented investigating by using electromagnetic field analysis whether stray loss can be suppressed using an aluminum shield.
-
[JAC268] SPM Motor Teeth Geometry Topology Optimization
In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents
This document introduces an analysis model is created based on the excitation current method, and the differences in magnetic properties obtained when the frequency is changed are…
-
[JAC107] Current voltage characteristics analysis of flyback converters
In this example, this case study obtains the current waveform of the primary / secondary winding and the core magnetic flux density distribution, current density distribution insi…
-
[JFT097] Optimization Execution Using Material Characteristics as Design Variables
In this document, how to perform optimization with material characteristics used as design variables is presented.
-
[JAC192] Response Characteristics Analysis of Solenoid Valves Accounting for Residual Magnetization
In this example. we will discuss the steps to investigate the effect on responsiveness caused by residual magnetization generated in the magnetic materials, and look at case examp…
