JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC026] Braking Torque Analysis of an Electromagnetic Brake
This Application Note shows how to obtain the braking torque of an electromagnetic brake during drive.
-
[JAC022] Analysis of the Eddy Current in the Magnet of an IPM Motor
This Application Note presents the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions…
-
[JAC015] Cogging Torque Analysis of an SPM Motor with a Step Skewed Magnet
This Application Note presents the use of magnetic field analysis to evaluate the magnetic flux density distribution and cogging torque in each part of an SPM motor with a step sk…
-
[JAC040] Cogging Torque Analysis of an SPM Motor
This Application Note presents the use of magnetic field analysis to obtain the cogging torque of an 8-pole, 9-slot SPM motor, which has relatively small period.
-
[JAC029] Iron Loss Analysis of an SPM Motor with Overhanging Magnet
This Application Note presents the use of a no-load iron loss analysis of an SPM motor with and without an overhanging magnet.
-
[JAC039] Torque Analysis of a Three Phase Induction Motor Accounting for the Skew
This Application Note presents a comparison of the torque waveforms of three phase squirrel cage induction motors with and without torque, and introduces the effects of using skew…
-
[JAC023] Eccentricity Analysis of an IPM Motor
This Application Note presents how to obtain variations in electromagnetic force according to changes in the amount of rotor eccentricity.
-
[JAC027] Head Field Analysis of a Recording Write Head That Accounts for Eddy Currents
This Application Note shows how to obtain the responsiveness of recording head field that is generated in the magnetic head.
-
[JAC028] Magnetic Field Analysis of a Speed Sensor
This Application Note presents the use of magnetic field analysis to evaluate the variation of the voltage signal of a magnetic speed sensor for a range of air gap distances.
-
Current Status of NdFeB Magnet and Analysis method
Yasuhiro Marukawa, NEOMAX CO.,LTD.
-
Resent Progress of Non-oriented Electrical Steel and Measurement Techniques
H.Mogi, Nippon Steel Corporation
-
Transition of IPMSM for Air-Conditioners, and a Future Trend.
Yuichi Yoshikawa, Motor Company Matsushita Electric Industrial Co.,Ltd.
-
Motor Design Technologies Considering Detailed Magnetic Properties in Magnetic Core
Akihiro Daikoku, Mitsubishi Electric Corporation
-
Inductance simulation for Bus Bar
Motomichi Ohto, Yaskawa Electric Corporation
-
Development of the In-wheel Multipolar SR motor for an Electric Vehicle based on Magnetic Circuit Method
Kenji Nakamura, Tohoku University
-
Analysis of Transformer using JMAG-Studio
Hidenori Uematsu, Panasonic Electronic Devices Co.,Ltd
