JMAG-Designer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC018] Thermal Analysis of a Motor
In this example, how to evaluate a motor's temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distribution in ord…
-
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
-
[JAC006] Analysis of the SR Motor Torque Ripple
This Application Note explains how to carry out a torque analysis that changes the switch conversion timing and evaluate both the torque ripples and average torque in an SR motor.
-
[JAC014] Inductance Analysis of a Bus Bar
This note presents a case study on the current distribution and the frequency versus inductance characteristic of the bus bar.
-
[JAC021] Iron Loss Analysis of an SPM Motor Including the Effect of Shrink Fitting
This note presents an analysis to obtain the iron loss density of an SPM motor both including and not including the stress caused by shrink fitting.
-
[JAC003] Analysis of a Permanent Magnet Brush Motor
This document introduces how the characteristics of the brush-type PM motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux de…
-
[JAC019] Analysis of the Centrifugal Force in an IPM motor
This Application Note presents examples of cases that obtain changes and stress distribution from the centrifugal force in the rotor.
-
[JAC010] Thermal Analysis of a Radiant Heater
This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…
-
[JAC007] Analysis of a Spindle Motor
In this example, how the Speed-Torque curve, the Torque-Current curve and the magnetic flux density distribution of a spindle motor can be obtained.
-
PSIM: An Expandable Dynamic Simulation Platform for the Analysis and Design of Power Electronics and Motor Drivee Systems
Hua Jin, Powersim Inc.
-
200 KW PERMANENT MAGNET ALTERNATOR ANALYSIS & COMPARISON TO TEST RESULTS
James R Hendershot, Motorsoft Div & Fisher Electric Technology
-
Comparison to Measurements of Combined Simulation with RT Model of IPM Motor
Yukari Toide, Mitsubishi Electric Corporation
-
Practical Use of Connected Electro-circuit Simulation with Electromagnetic Analysis in the Development of Robot Actuator
Takeo Kishida, Sony Corporation
-
Analysis of RF devices using JMAG-Studio -Evaluation of transmission characteristics of RFID and RF splitters-
Takashi Takeo, Mie University
-
Promotion to Spread JMAG to Actuator Development and Applications
Hideyuki Watanabe, Keihin-corp.co.jp
-
Dynamic Analysis of the PM stepping motor by behavior model and circuit simulator
Kaoru Miyazaki, SANYO Seimitsu Co.,Limited
