JMAG-RT Viewer
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[RTML-006] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 46(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-005] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 80(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-004] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 77(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
[RTML-003] PMSM/SPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 53(mm) | Height: 36(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: SPM | Average torque: 3.6(N·m)
-
[RTML-002] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 54(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(flat) | Average torque: 3.6(N·m)
-
[RTML-001] PMSM/IPM Constant rating 1(kW) 3-phase
Type: PMSM | Max Power: 1(kW) | Stator(Outside Diameter): 54(mm) | Height: 51(mm) | Voltage/Current: DC100(V)/20(A) | Rotor/Mover: IPM(Vshaped) | Average torque: 3.6(N·m)
-
Smart Motor Control Technology Evolving with AI – Virtual Sensors and Fault Detection –
Atsushi Katagiri, MathWorks Japan
-
[W-MB-181] Validation of JMAG-RT Spatial Harmonic Model Accuracy: Comparison of Differential Equation Models, Integral Method Models, and FEA
JMAG-RT generates models that can simulate nonlinear motor characteristics for use in control circuit designs done with software-in-the-loop (SIL), hardware-in-the-loop (HIL), and…
-
Model-Based Solution for Efficient Motor Control System Development
Atsushi Katagiri, MathWorks Japan
-
[W-MB-152] Accuracy of Motor Plant Model Required for ECU testing
ECU testing is performed under various conditions from the normal to the abnormal system.
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JFT141] JMAG-RT Model Data File Creation Function in JMAG-Designer
This document will show you how to export the efficiency map/loss map obtained in JMAG as a JMAG-RT model data file and to check the plot in JMAG RT-Viewer.
-
[JFT133] System Loss Evaluations in System-Level Simulations
This document describes the method to output an efficiency map / loss map obtained with JMAG and using a circuit simulation to comprehend drive cycle system loss.
-
[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction
In this example, obtains N-T curves using the correction function.
-
[W-MO-85] Efficiency Map Evaluations Considering Harmonic Loss
In this paper, we propose a method that combines two approaches to calculate the efficiency at various operating points considering the influence of time harmonics and other effec…
-
[W-MB-63] Method for Determining the Optimum Resolution of JMAG-RT Model
In this paper, we present a method to increase the resolution of a JMAG-RT model iteratively while performing system simulation.
