Efficiency Map
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JFT159] How to Create Motor Design Using Models & Scenarios
This enables you to create motor models, run analysis and evaluate the results in fewer steps. This document explains the procedure on how to create models using the templates and…
-
[W-MO-114] Comparison of Efficiency Map with Measurement
This document compares an efficiency map obtained with simulations with an efficiency map consisting of actual measurements, achieving an error of 1% or less for entire regions.
-
[W-MB-151] Accuracy of Motor Plant Model Required for Control Calibration
Control calibration is time-consuming work because it is carried out for every operating point using the actual machine.
-
[W-MB-156] Improving Motor Plant Model Accuracy by Accounting for Harmonic Iron Loss
Because of the acceleration of the motor and the effect of the PWM drive, it is becoming more important to account for loss in order to improve accuracy even for analysis using mo…
-
[JFT149] How to Create JMAG-RT Model with JMAG Designer and Run Consecutive Control Simulation
This document explains the procedure on how to create a JMAG-RT model in JMAG-Designer and how to use the created model to run consecutive control simulation.
-
[JFT121] Calculating Energy Consumption During Drive Cycle Using Efficiency Maps
This document describes the method for calculating energy consumption during a drive cycle using an obtained efficiency map and tools.
-
Next Generation EV Motor Design Using JMAG-Designer
Bernd Cebulski, IAV GmbH
-
Development of Axial-Gap motor for AGV
Tatsuya Higashi, Shizuoka University, Graduate School of Science and Technology
-
Relationship of Parallel Number of Analyzes to Analysis Time with Outer Rotor Type Fan Motor
Tsukasa Asari, DAIKIN INDUSTRIES,LTD
-
Optimization (multi-objective, multi-physical) and Verification of E-Motor Design Using Real Test Bench Data
Tim Schwartz / Sebastian Igel, Great Wall Motor Austria Research & Development GmbH
-
[JAC278] Creating Six-Phase Induction Motor Efficiency Maps
In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.
-
[JFT070] Creating PM Motor Efficiency Maps Using JMAG-Designer (Accuracy Priority Mode)
This document describes how to create efficiency map studies (accuracy priority mode) using a JMAG-Designer efficiency map study (speed priority mode).
-
[JAC165] Creating IPM Motor Efficiency Maps
In this example, an efficiency map of an IPM motor is created and the loss ratios at each operating point are evaluated.
-
[JAC217] Creating Efficiency Maps for 3-Phase Induction Motors
In this example, the use of JMAG-RT Viewer to create efficiency maps for three-phase induction motors when drive temperatures change.
-
[JFT141] JMAG-RT Model Data File Creation Function in JMAG-Designer
This document will show you how to export the efficiency map/loss map obtained in JMAG as a JMAG-RT model data file and to check the plot in JMAG RT-Viewer.
-
[JAC264] Creating 6-Phase IPM Motor Efficiency Maps
In this example, the efficiency map of a 6-phase IPM motor is created with loss ratios at each operating point also evaluated.
