Transformer / Reactor
 Sort condition
 Newest first
 Oldest first
 Views

254 – Vibration Analysis of OilImmersed Large Transformer
In this example, evaluating vibration caused by electromagnetic excitation in a large transformer. Since large transformers are oilcooled, in this example the oil, which is the f…

[LTR44] Winding Vibration Analysis of a Power Transformer
Winding vibration originating from a transformer is a vibration phenomenon that uses Lorentz force as the vibration force, which occurs when flux leakage from the winding works on…

[WTR15] Loss Evaluation of a Transformer Shield Based on the Homogenization Method
In this paper, each electromagnetic steel sheet of the shield is not modeled; by applying the homogenization method which replaces magnetically and electrically equivalent materia…

[WSE72] Reduction of Time Steps by Using Time Periodic Explicit Error Correction Method
In electrical equipment design, Computer Aided Engineering (CAE) software is used to make the best possible products within allowable timelines.

[WSE53] Transition to Steady State in a Short Time
In the following, it is shown that the steady state analysis results can be obtained with less number of time steps by using the TPEEC method.

[WHU71] Notes on Performance Evaluation and Hardware Selection of JMAG Parallel Solver
This document can be thought of as pointers and precautions for hardware selection and software operation.

Analysis of Winding Losses of Shunt Reactor using “Zooming Analysis”
Yasuhisa Ito, MEIDENSHA CORPORATION

3D Magnetic Field Analysis of Large Power Transformer with Parallel Calculation Processing
Hirokazu Hayashida, Fuji Electric Co.,Ltd.

235 – Reactor Core Stray Loss Analysis
In this example, reactor core stray loss is described.

203 – NoLoad Test Analysis of Power Transformer
This example focuses on modeling in the analysis of noload tests in JMAG and obtains the iron loss distribution, current, excitation conductance, and excitation susceptance that …

221 – Confirmation of the Influence in the Reduction of HighFrequency Resistance of a Magnetically Plated Wire Choke Coil
In this example, high frequency resistance values are obtained from choke coil copper loss analysis results using JMAG’s layer coating mesh function, and the effectiveness of redu…

202 – Core Stray Loss Analysis of Power Transformer
This document introduces runs analysis by modeling the shortcircuit test that is conducted when evaluating stray loss and obtains stray loss distribution in the core close to the…

238 – Hysteresis Loss Analysis in a Reactor with DC Bias
In this example, we will observe the difference between the hysteresis losses calculation method loop count and the play model for the model that is subjected to a DC bias filed o…

232 – Reactor Joule Loss Analysis
In this example, investigating Joule loss with respect to the positions of air gaps in a reactor is presented.

206 – Temperature Analysis of an OilImmersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oilimmersed transformer, map the…

204 – Copper Loss Reduction Effect Analysis of Switching Transformers using Litz Wire
This document introduces confirms the effects on copper loss due to the presence or absence of a twisted structure in the winding regarding the copper loss that occurs in the smal…