Search results

[JAC191] Torque Analysis of Three-Phase Induction Motors Accounting for the Skew Using the Multi-slice Method

DATAFile nameSize (KB)Application NoteJAC191IM-MultiSlice-e.zip831Model DataJMAG-Designer 13.1JAC191IM-MultiSlice-d.zip1,216Case

[JAC197] Electric field distribution Analysis of a Electroplating

DATAFile nameSize (KB)Application NoteJAC197Electroplating-ElectricField-e.zip401Model DataJMAG-Designer 13.1JAC197Electroplating-ElectricField-d.zip33,481Case

[JAC198] Bus Bar Thermal Stress Analysis

Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.

• Applications: Bus Bar
• Module: DS, FQ, and HT
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: Multiphysics

[JAC189] Response Characteristics Analysis of Injectors Accounting for Collision

For this case, direct current voltage is applied to the solenoid type injector and the response characteristics is obtained after accounting for the effect of the collision and ed…

• Applications: Linear Solenoid / Linear Actuator
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC188] Thermal Demagnetization Analysis of IPM Motors Accounting for Coercive Force Distribution of Magnets

This example presents whether or not the demagnetization region can be smaller by assigning distribution to the coercive force of permanent magnets.

• Applications: IPM Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field and Material
• Technical Themes: Multiphysics

[JAC185] Analysis of Stray Loss in a Power Transformer

This note obtains loss distribution for each component in drive condition and checks local overheating.

• Applications: Transformer / Reactor
• Module: FQ and LS
• Physical Phenomena: Magnetic Field

[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account

These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.

• Applications: Magnetic Component and Transformer / Reactor
• Module: DS and TR
• Physical Phenomena: Magnetic Field, Material, and Structural
• Technical Themes: Multiphysics

[JAC183] Agitation Force Analysis of an Induction Furnace

This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.

• Applications: Induction Heating
• Module: FQ
• Physical Phenomena: Magnetic Field

[JAC180] Analysis of SR Motor Dynamic Characteristics

This example presents how to carry out an analysis with different switch timings to evaluate torque and current in SR motors.

• Applications: Motor and SR Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC179] Analysis of SR Motor Static Characteristics

This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.

• Applications: Motor and SR Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC178] Analysis of SR Motor I-Psi Characteristics

This example presents an evaluation of flux linkage, inductance and torque for each rotor position when the flowing current value is changed.

• Applications: Motor and SR Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC177] Torque Characteristic Analysis of a Three Phase Induction Motor

This Application Note explains how to obtain the torque characteristics in an induction motor when the current amplitude has been changed in a specific slip.

• Applications: Induction Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC173] Basic Characteristic Analysis of an IPM Motor

This Application Note demonstrates an analysis in which an IPM motor's cogging torque, torque, magnetic flux density distribution, and iron loss in the stator core are obtained.

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)

This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC166] Line Start Simulation of an Induction Machine Using a Control Simulator and the JMAG-RT

DATAFile nameSize (KB)Application NoteJAC166IM-RT-e.zip602Model DataJMAG-Designer 14.1MATLAB/Simulink R2010aJAC166IM-RT-d.zip1,541Case

[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account

DATAFile nameSize (KB)Application NoteJAC184REACTOR-SoundPressure-e.zip1,329Model DataJMAG-Designer 14.1JAC184REACTOR-SoundPressure-d.zip11,338Case