Search results

[JAC151] Insulation Evaluation Analysis of a Power Transformer

In this example, how to obtain the electric field intensity distribution when a lightning strike or short circuit occurs and the assumed maximum voltage is applied to the winding.

• Applications: Transformer / Reactor
• Module: EL
• Physical Phenomena: Electric Field

[JAC030] Magnetization Field Evaluation of an SPM motor

DATAFile nameSize (KB)Application NoteJAC030SPM-Magnetization-e608Model DataJMAG-Designer 19.0JAC030SPM-Magnetization-d.zip984Case

[JAC030] Magnetization Field Evaluation of an SPM motor

In this example, carry out SPM motor's magnetization to obtain the magnetization field and magnet's surface magnetic flux density.

• Applications: Motor and SPM Motor
• Module: ST
• Physical Phenomena: Magnetic Field and Material

[JAC151] Insulation Evaluation Analysis of a Power Transformer

DATAFile nameSize (KB)Application NoteJAC151Transformer-ElectricFieldOfInsulation-e.zip542Model DataJMAG-Designer 19.0JAC151Transformer-ElectricFieldOfInsulation-d.zip3,442Case

[JAC064] Thrust Force Analysis of a Coreless Linear Motor

DATAFile nameSize (KB)Application NoteJAC064LSM-Coreless-e.zip953Model DataJMAG-Designer 18.1JAC064LSM-Coreless-d.zip6,090Case

[JAC064] Thrust Force Analysis of a Coreless Linear Motor

In this example, explains how to obtain the thrust variations in a coreless linear motor when it is driven with a three-phase alternating current.

• Applications: Linear Motor and Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

This document introduces evaluates how heating ranges change depending on the deformation amount at high temperatures and deformation during heating, with heat generation analysis…

• Applications: Induction Heating
• Module: ABAQUS2 and FQ
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: MBD and Multiphysics

[JAC208] High Frequency Induction Hardening Analysis Accounting for Deformation (Abaqus Link)

DATAFile nameSize (KB)Application NoteJAC208IH-InductionHardening_AbaqusCSE-e.zip945Model DataJMAG-Designer 16.0Abaqus 6.14-5JAC208IH-InductionHardening_AbaqusCSE-d.zip3,028Case

[JAC244] Magnetic Field Strength Analysis at a Sensor Position

In this example, with the analysis target being a motor and the detection sensor being a TMR sensor, an example where a detection signal waveform is obtained that is based on magn…

• Applications: Sensor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC244] Magnetic Field Strength Analysis at a Sensor Position

DATAFile nameSize (KB)Application NoteJAC244SENSOR-TMR-e.zip421Model DataJMAG-Designer 17.1JAC244SENSOR-TMR-d.zip864Case

[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.

• Applications: Induction Heating
• Module: DS, FQ, and HT
• Physical Phenomena: Magnetic Field, Structural, and Thermal
• Technical Themes: Multiphysics

[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation

DATAFile nameSize (KB)Application NoteJAC218IH-Gear-ThermalStress-e.zip940Model DataJMAG-Designer 17.0JAC218IH-Gear-ThermalStress-d.zip1,079Case

[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction

In this example, obtains N-T curves using the correction function.

• Applications: IPM Motor and Motor
• Module: TR
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC255] Evaluating the N-T Curve of an IPM motor Using 3D Correction

DATAFile nameSize (KB)Application NoteJAC255IPM-RT-3Dcorrection-e.zip624Model DataJMAG-Designer 18.0JAC255IPM-RT-3Dcorrection-d.zip41,114Case

[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

In this example, deals with induction heating and cooling analysis. An example is presented where the cooling rate for a gear differs depending on the cooling conditions.

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC220] Analysis of the High-Frequency Induction Hardening and Cooling of a Gear

DATAFile nameSize (KB)Application NoteJAC220IH-CoolingProcess-e.zip776Model DataJMAG-Designer 17.0JAC220IH-CoolingProcess-d.zip1,302Case