[JAC010] Thermal Analysis of a Radiant Heater

This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…

• Applications: Heater
• Module: HT and TR
• Physical Phenomena: Magnetic Field and Structural

[JAC010] Thermal Analysis of a Radiant Heater

DownloadVersionSize (KB)Application Note -1,540Model Data JMAG-Designer 22.13,830Case

[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-

In this example, the effects on iron loss when the modulation method for PWM control is changed are evaluated.

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC286] IPM Motor Iron Loss Analysis Accounting for PWM -Evaluation with Different Modulation Methods-

DownloadVersionSize (KB)Model Data JMAG-Designer 22.24,186Case

[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors

In this example, loss maps with temperature dependency for an IPM motor are used to compare and evaluate the energy consumption and efficiency during a WLTC drive cycle while usin…

• Applications: IPM Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field
• Technical Themes: MBD

[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models

In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…

• Applications: Axial Gap Type Motor and Motor
• Module: LS and TR
• Physical Phenomena: Magnetic Field

[JAC292] Evaluating Energy Consumption During Drive Cycle Using Loss Maps with Temperature Dependency for IPM Motors

DownloadVersionSize (KB)Model Data JMAG-Designer 23.08,335Case

[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models

DownloadVersionSize (KB)Model Data JMAG-Designer 23.020,126Case

[JAC203] No-Load Test Analysis of Power Transformer

This example focuses on modeling in the analysis of no-load tests in JMAG and obtains the magnetic flux line, current, excitation conductance, and excitation susceptance that can …

• Applications: Transformer / Reactor
• Module: FQ and LS
• Physical Phenomena: Magnetic Field

[JAC034] Demagnetization Analysis of an SPM Motor

This note presents the use of a magnetic field analysis to evaluate the demagnetizing ratio distribution of an of an SPM motor by changing the current flow.

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field and Material

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.

• Applications: IPM Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC034] Demagnetization Analysis of an SPM Motor

DownloadVersionSize (KB)Application Note -594Model Data JMAG-Designer 21.1571Case

[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-

DownloadVersionSize (KB)Application Note -651Model Data JMAG-Designer 22.02,960Case

[JAC203] No-Load Test Analysis of Power Transformer

DownloadVersionSize (KB)Application Note -3,888Model Data JMAG-Designer 23.0789Case

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

In this example, analysis is performed while varying the temperature of magnetized magnets, and then the influence on the torque waveform and magnetic flux density distribution is…

• Applications: IPM Motor and Motor
• Module: DP and ST
• Physical Phenomena: Magnetic Field and Material
• Technical Themes: Multiphysics

[JAC222] Irreversible Thermal Demagnetization Analysis of Incompletely Magnetized Magnets

DownloadVersionSize (KB)Application Note -1,344Model Data JMAG-Designer 22.02,527Case