Inductance Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[W-MO-212] Wide-band Simulation Method for Inductors
This paper describes an approach for modeling a wide-band impedance analysis using an electromagnetic finite element analysis that takes into account displacement currents (Full-W…
-
Challenges for Wide Frequency Band Operation of Inverter Drive Motors
Kazumasa Ide, Nagoya University
-
[L-MO-54] JMAG-Express Online
JMAG-Express Online is a Web service to support your motor design work anytime, anywhere.
-
[JAC060] Superimposed Direct Current Characteristic Analysis of a Reactor
This Application Note explains a case example that obtains the superimposed direct current characteristics of a high-frequency reactor when the gap width is changed.
-
[JAC122] Inductance Analysis of an IPM Motor -d/q-axis Inductance Obtained by Actual Measurement-
This Application Note presents an analysis that obtains d/q-axis inductance in an IPM motor while assuming actual measurements in a stationary rotor.
-
[JAC017] Inductance Analysis of an IPM Motor
This Application Note explains how to obtain the current phase angle characteristics of a dq axis inductance that accounts for magnetic saturation and flux leakage in an IPM motor.
-
Design of Three-Phase Wireless Power Transfer System with 12 Coils
Daisuke Sato, Nagaoka Motor Development Co., Ltd.
-
Effects of the Aluminum Coil on the WPT System
Atsushi Ogasahara, Tabuchi Electric co., ltd.
-
Higher Radial Suspension Force of Magnetic Bearing on Centrifugal Compressor for HVAC
Yusuke Irino, DAIKIN INDUSTRIES, LTD.
-
[JAC195] Torque characteristics analysis of three-phase induction motors using 3D correction function
This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…
-
[W-MB-65] The Necessity of JMAG-RT 3D Models
In this paper, the necessity of 3D FEA models in plant model generation will be discussed.
-
[JAC199] Efficiency Analysis of Wireless Power Transfer via Electromagnetic Induction Method using Resonance Circuits
This example presents, an electromagnetic induction-type wireless power supply system using an excitation circuit positioned with a parallel resonance condenser on the receiving e…
-
[JAC179] Analysis of SR Motor Static Characteristics
This example presents an evaluation for each rotor position of the effect on flux linkage (shown as I-Psi characteristics below) when excitation current is changed.
-
[JAC154] Calculation of Equivalent Circuit Parameters in a Three-Phase Induction Motor
This Application Note explains how to obtain the secondary resistance, leakage inductance, and excitation inductance of an induction motor when its power supply frequency has been…
-
[JAC077] Inductance Analysis of an RFID Tag
This Application Note performs a magnetic field analysis of an RFID tag that has a metallic film and a magnetic sheet with a resonance frequency of 13.56 MHz, and obtains the magn…
-
[JAC101] AL-value Current Characteristics Analysis of a Choke Coil
This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.
