DS
Static/Dynamic Structural (2D/3D)
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Application of Topology Optimization Analysis Technology for Traction Motor of Automotive
Yukihiro Yoshinari, Hitachi Automotive Systems, Ltd.
-
Induction Motor Noise Reduction using JMAG
AMMAR Aymen, JEUMONT Electric
-
[JAC257] IPM Motor Topology Optimization
In this example, rotor core maximum stress and radial direction maximum displacement in the radial direction are set to certain values or less, and rotor geometry is designed that…
-
[JAC263] IPM Motor Stress Analysis Taking Into Account Friction between Magnets and the Rotor Core
In this example, in order to evaluate how the contacts between the magnets and the rotor core in an IPM motor affect the stress distribution, the von Mises stress is checked when …
-
Comprehensive System to Component xEV Simulation Using Gamma Technologies and JMAG
Joe Wimmer, Gamma Technologies, LLC
-
[JAC254] Vibration Analysis of a Large Oil-Filled Transformer
In this example, evaluating vibration caused by electromagnetic excitation in a large transformer. Since large transformers are oil-cooled, in this example the oil, which is the f…
-
[JAC218] High-Frequency Induction Hardening Analysis Accounting for Deformation
In this example, using the JMAG magnetic field - thermal stress coupled analysis function, analysis is performed evaluating gear deformation from induction heat hardening.
-
[JFT076] Methods for Running Geometry Optimization Using Multiple Studies
This document describes how to run geometry optimization using multiple studies.
-
Analyzing Permanent Magnet Motors with Magnetic Field + Structural Coupling Using PSL (Power Simulation Licenses)
Makoto Matsushita, Toshiba Infrastructure Systems & Solutions Corporation / Takashi Nakaoka, JSOL Corp.
-
Electromagnetic Field – Thermal Stress Coupled Analysis and Experiment Verification in High Frequency Induction Hardening
Yohei Awata, Denki Kogyo Co.,Ltd.
-
Low Oscillation Actuator for Force-controlled Medical Robot Arm
Tetsuharu Fukushima, Sony Imaging Products & Solutions Inc.
-
Investigating the Possibility of Improving Performance by Applying CFRP to Outer Rotor Housing
Yoshiyuki Sakashita, PUES Corporation
-
[JFT064] Methods for Motor Vibration Analysis Accounting for Skew Effect with 2D Model
This document explains methodology for motor vibration analysis accounting for 2D step skew.
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC020] Sound Pressure Analysis of an SPM Motor
This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
