Circuit / Control

Sort condition
Newest first
Oldest first
Large number of views
  1. [JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor

    This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …

  2. Customized Development of Automotive Motor System using JMAG-Studio

    Ryoma Matsuo, PUES Corporation

  3. [JAC041] Positioning Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

    This Application Note presents how to use the JMAG-RT to obtain the space harmonics and current dependency of the thrust and coil inductance and import them to a circuit/control s…

  4. Modern Hardware-In-the Loop Simulation Technology for Fuel Cell Hybrid Electric Vehicles

    Christian Dufour, OPAL-RT Technologies Inc.

  5. Comparing Coupled Analysis with Experimental results for IPMSM

    Kan Akatsu, Tokyo University of Agriculture and Technology

  6. [JAC011] Pull-in/pull-out Analysis of a PM Stepper Motor Using a Control Simulator and the JMAG-RT

    This note presents how JMAG-RT can be used to calculate holding torque and coil inductance that varies with current. The result is the JMAG-RT motor model used as a reference for …

  7. PSIM: An Expandable Dynamic Simulation Platform for the Analysis and Design of Power Electronics and Motor Drivee Systems

    Hua Jin, Powersim Inc.

  8. Comparison to Measurements of Combined Simulation with RT Model of IPM Motor

    Yukari Toide, Mitsubishi Electric Corporation

  9. Practical Use of Connected Electro-circuit Simulation with Electromagnetic Analysis in the Development of Robot Actuator

    Takeo Kishida, Sony Corporation

  10. Sensorless Control Scheme and Experimental Characteristics for Permanent Magnet Synchronous Motors

    Takaharu Takeshita, Nagoya Institute of Technology

  11. The Motor Control Technologies for New-Generation Prius

    Ryoji Mizutani, TOYOTA MOTOR CORPORATION

  12. Practical Applications of Electro-magnetic Analysis Combined with Simulation of Drive Systems for Rotating Machines

    Haruyuki Kometani, Mitsubishi Electric Corporation

  13. Simulation Analysis for Power Electronic Systems

    Masahiro Kimata, Mitsubishi Electric Corporation

  14. Magnetic Field Analysis on Motor Design

    Motomichi Ohto, Yaskawa Electric Corporation

  15. Expectation of the Mchatro Total Simulation System and Subjects to that Completion

    Ryuichi Oguro, Kyushu Institute of Technology

  16. Development of a coupled simulation tool of coaxial motor driver by compound current for HEV

    Kan Akatsu, Nissan Motor Co., Ltd.

Search Filter

  • All Categories