Electric Field

Sort condition
Newest first
Oldest first
Views
  1. 249 – Dielectric Heating Analysis of a High-Frequency Preheater with Parallel Plate Electrodes

    In this example, a use case evaluating the influence on the temperature distribution of materials (tablets) with and without auxiliary electrodes is presented.

  2. 73 – Analysis of Capacitance of a Parallel Plate Capacitor

    This Application Note explains how to use JMAG to calculate the capacitance when the dielectric material is air and when it is a high permittivity material, while obtaining the am…

  3. 197 – Electric field distribution Analysis of a Electroplating

    This document introduces will introduce the electric field distribution in a model with the negative pole geometry facing the positive pole that is not parallel but slanted.

  4. 196 – Analysis of coil stray capacitance

    This document introduces target on the helical coil, changes the distance between windings, and obtains stray capacitance that occurs in each coil.

  5. Electric field analysis of the Tape Lapped Joint for power cable

    Takeo Matsui, Tokyo Electric Power Company Holdings, Inc.

  6. Applying JMAG to Power Transformer Designs – Preventing Insulation Breakdowns Ahead of Time –

    What Advantages Does FEA Bring to Development?I would like to clarify how much value there is in introducing finite element analysis (FEA) to the electrical equipment design field…

  7. 151 – Insulation Evaluation Analysis of a Power Transformer

    This Application Note shows how to obtain the electric field intensity distribution when a lightning strike or short circuit occurs and the assumed maximum voltage is applied to t…

  8. 131 – Stray Capacitance Analysis of a Motor

    This note presents the use of analysis to obtain the stray capacitance between an IPM motor’s coil and stator core, between its rotor core and stator core, and between the inner a…

  9. 42 – Displacement Analysis of a Piezoelectric Actuator

    This note presents the use of structural analysis to evaluate the displacement of a bimorph piezoelectric actuator, caused by the inverse piezoelectric effect.

  10. Analysis of RF devices using JMAG-Studio -Evaluation of transmission characteristics of RFID and RF splitters-

    Takashi Takeo, Mie University

  11. A simulation of the electromagnetic wave distribution in the microwave oven designed by 3-dimensional CAD (CATIA)

    Koji Yoshino, Matsushita Electric Industrial Co., Ltd.

  12. Temperature Distribution Analysis of Optical Disk Using JMAG

    Masahiro Matsumaru, Victor Company of Japan, Limited

  13. Development of Fast Frequency Sweep for JMAG’s High Frequency Solver

    David Dibben, The Japan Research Institute,Limited.

  14. Numerical results of receiving characteristics of a large crane in madium frequency

    Tomita Hajime, National Institute of Industrial Safety

  15. Development of Surface-wave Interferde Plasma Source Using JMAG-Works WV

    Nobumasa Suzuki, Canon Inc.

  16. Analysis of Electromagnetic waves using the FDTD Method

    Tatsuya Kashiwa, Kitami Institute of Technology

Search Filter