Multiphysics
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC142] Press Fit Analysis of a Divided Core
This Application Note presents how to use the Press Fit condition to model an analysis of the stress from fitting a core to a frame, and then obtain the iron loss density of an IP…
-
[JAC020] Sound Pressure Analysis of an SPM Motor
This Application Note shows an example of an evaluation of a reactor’s sound pressure, when acquiring electromagnetic force generated by a stator core for a SPM motor and linking …
-
[L-MU-93] JMAG/Adams/Simulink Coupled Vehicle Drive Simulation
Generally, it is said that drive motors used in electric cars have less vibration than engines, however, vibration caused by torque ripple may be transmitted to the entire vehicle…
-
[L-MU-92] JMAG/Particleworks Coupled Motor Cooling Analysis
Motor temperature control is an important issue. Due to temperature rise, demagnetization occurs in PM motor magnets leading to a loss of high efficiency.
-
[L-MU-07]Multiphysics Analysis by Linking with Specialized Tools
The mapping function between models with different dimensions in a JMAG multiphysics analysis can also be used when running a coupled analysis with other tools. JMAG makes it poss…
-
[JFT004] Two-way coupled analysis function with JMAG and STAR-CCM+
This document contains sample data and operation procedures for learning about external solver coupling conditions and procedures for two-way coupled analysis with STAR-CCM+.
-
[JAC206] Temperature Analysis of an Oil-Immersed Transformer Using a Coupled Magnetic Field and Thermal Fluid Analysis
This document introduces, examples and steps will be shown to obtain heat distribution in a magnetic field analysis for a forced circulation type oil-immersed transformer, map the…
-
[JAC198] Bus Bar Thermal Stress Analysis
Here, temperature distributions for bus bars are obtained when the power supply frequency is changed.
-
[JAC188] Thermal Demagnetization Analysis of IPM Motors Accounting for Coercive Force Distribution of Magnets
This example presents whether or not the demagnetization region can be smaller by assigning distribution to the coercive force of permanent magnets.
-
[JAC184] Reactor Sound Pressure Analysis taking Magnetostriction into Account
These notes will conduct an analysis of changed vibratory force and show a case study of confirming the impact magnetostriction has on vibration noise.
-
[JAC172] High-Frequency Induction Heating Analysis of a Test Piece (Rotational Induction Hardening)
This Application Note explains how to create a numerical analysis model when obtaining the optimum coil geometry, current conditions (power supply frequency, current value), and r…
-
[W-MO-23] Measurement of PM Motor Vibration/Noise and Analysis Modeling
While miniaturization and efficiency optimization are always in demand in motor development, demand is also increasing for the reduction of vibration and noise in recent years. As…
-
[JAC120] Thermal Demagnetization Analysis of an SPM Motor
This Application Note presents how to change the temperature of permanent magnets in an analysis, and then evaluate the effects on the torque waveform, magnetic flux density distr…
-
[JAC097] Sound Pressure Analysis of a Transformer
This example presents the use of a coupled magnetic field and structural analysis to obtain the sound pressure distribution accounting for the electromagnetic force of the core wh…
-
[JAC133] Thermal Analysis of a Three-phase Transformer
This Application Note presents an example of how to confirm a temperature distribution using the iron and copper losses of a three-phase transformer as heat sources.
-
[JAC100] Surface Heating Analysis of a Steel Plate
This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …
