Transient Magnetic (3D)
260 – Creating Axial Gap-Type Motor Efficiency Maps
In this example, the motor performance of axial gap-type motors with changes made to the flatness ratios.
277 – Vibration Analysis of Axial Gap-Type Motors
OverviewAxial gap type- motors can be can have a thinner construction than radial gap-type motors, and are used for in-vehicle motors where space is limited. In general, the motor…
18 – Thermal Analysis of a Motor
This Application Note explains how to evaluate a motor’s temperature distribution by creating a thermal analysis model that can investigate the loss analysis and temperature distr…
272 – Thrust Analysis of Linear Actuator with a Curved Section
In this example, the thrust characteristics of a linear actuator with a curved section are obtained via analysis, and thrust at the transition from a linear motion to a curved mot…
271 – Axial Gap Type Motor AC Copper Loss Analysis
In this example, the AC copper loss of an axial gap type motor using square wire is evaluated.
22 – Analysis of the Eddy Current in the Magnet of an IPM Motor
In this example, the use of a magnetic field analysis in a state of operation to obtain variations in magnet eddy current losses according to the number of divisions in the magnet.
228 – Induction Motor Thermal Analysis
In this example, evaluating induction motor temperature distribution.
64 – Thrust Force Analysis of a Coreless Linear Motor
In this example, explains how to obtain the thrust variations in a coreless linear motor when it is driven with a three-phase alternating current.
8 – Analysis of an Axial Gap Motor
In this example, how to use JMAG's 3D magnetic field analysis to carry out a load analysis of an axial gap motor, and then obtain the Torque-Speed curve and the Torque-Current cur…
7 – Analysis of a Spindle Motor
In this example, how the Speed-Torque curve, the Torque-Current curve and the magnetic flux density distribution of a spindle motor can be obtained.
251 – Alternator Vibration Analysis
In this example, the electromagnetic force generated in the stator core of a claw pole alternator is obtained, and acceleration is evaluated with an electromagnetic force - struct…
255 – Evaluating the N-T Curve of an IPM motor Using 3D Correction
In this example, obtains N-T curves using the correction function.
219 – Axial Gap Motor Cogging Torque Analysis
In this example, presents a case study to obtain the cogging torque in an axial flux motor.
235 – Reactor Core Stray Loss Analysis
In this example, reactor core stray loss is described.
195 – Torque characteristics analysis of three-phase induction motors using 3D correction function
This document introduces introduces a case study which obtains inductance correction values, and then obtains N-T characteristics (revolution speed-torque characteristics) using t…
237 – AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.