[JAC104] Thrust Force Analysis of a Linear Induction Motor

This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.

• Applications: Linear Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC079] Analysis of an Effect of Magnetic Field Orientation on Magnetization

DATAFile nameSize (KB)Application NoteJAC079MAG-orientation-e.zip1,101Model DataJMAG-Designer 15.0JAC079MAG-orientation-d.zip815Case

[JAC111] Starting Performance Analysis of a Universal Motor

This document introduces the use of a magnetic field analysis to obtain the speed versus time graph, the current waveform, and the torque versus time graph for a universal motor.

• Applications: Brush Motor / Universal Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC069] Iron Loss Analysis of an IPM Motor

This Application Note explains a case example that obtains the iron loss and its distribution in a permanent magnet motor.

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC119] Torque Characteristic Analysis of a Three Phase Wound Rotor Induction Motor

DATAFile nameSize (KB)Application NoteJAC119IM-Woundrotor-e.zip1,463Model DataJMAG-Designer 13.1JAC119IM-Woundrotor-d.zip2,359Case

[JAC121] Output Analysis of a Salient-Pole Synchronous Generator

This Application Note presents the use of a magnetic field analysis to obtain the magnetic flux density distribution, no-load saturation curve, and output of a salient-pole synchr…

• Applications: Generator
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC082] Analysis of a Synchronous Reluctance Motor

This Application Note presents an evaluation of torque variations that occur when the phase of a sinusoidal wave current is changed.

• Applications: Motor and Synchronous Reluctance Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC079] Analysis of an Effect of Magnetic Field Orientation on Magnetization

This Application Note explains how to obtain a magnet’s surface magnetic flux density distribution while accounting for the orientation and magnetization processes.

• Applications: Magnet
• Module: ST
• Physical Phenomena: Magnetic Field and Material

[JAC078] Loss Analysis of a Sheet Coil Transformer

DATAFile nameSize (KB)Application NoteJAC078SHEETCOIL-Loss-e.zip481Model DataJMAG-Designer 12.0JAC078SHEETCOIL-Loss-d.zip2,159Case

[JAC130] Thermal Conductivity Analysis of Basic Geometry

DATAFile nameSize (KB)Application NoteJAC130BASIC-HeatConduction-e.zip539Model DataJMAG-Designer 11.0JAC130BASIC-HeatConduction-d.zip172Case

[JAC130] Thermal Conductivity Analysis of Basic Geometry

In this Application Note, the analysis accuracy is investigated by comparing the temperatures obtained through analysis in each part with theoretical values.

• Applications: Basic Geometry
• Module: HT
• Physical Phenomena: Thermal

[JAC086] Power Transmission Analysis of a Wireless Power Transfer System

DATAFile nameSize (KB)Application NoteJAC086IPS-e.zip489Model DataJMAG-Designer 12.0JAC086IPS-d.zip2,483Case

[JAC083] Magnetic Shielding Analysis of an Induction Furnace

DATAFile nameSize (KB)Application NoteJAC083InductionFurnace-e.zip513Model DataJMAG-Designer 12.0JAC083InductionFurnace-d.zip1,542Case

[JAC081] AL-value Analysis of a Choke Coil

DATAFile nameSize (KB)Application NoteJAC081CHOKECOIL-AL-e.zip388Model DataJMAG-Designer 12.0JAC081CHOKECOIL-AL-d.zip3,127Case

[JAC109] Operating Time Analysis of an Electromagnetic Relay Accounting for Eddy Currents

DATAFile nameSize (KB)Application NoteJAC110CHOKECOIL-Loss-e.zip842Model DataJMAG-Designer 16.1JAC110CHOKECOIL-Loss-d.zip12,011Case

[JAC131] Stray Capacitance Analysis of a Motor

This note presents the use of analysis to obtain the stray capacitance between an IPM motor’s coil and stator core, between its rotor core and stator core, and between the inner a…

• Applications: Bearing, IPM Motor, and Motor
• Module: EL
• Physical Phenomena: Electric Field