[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

DATAFile nameSize (KB)Application NoteJAC048IH-Printer-e.zip800Model DataJMAG-Designer 12.0JAC048IH-Printer-d.zip2,155Case

[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT

This note presents how JMAG-RT can be used to calculate attraction forces and coil inductance that varies with harmonic and current. The result is the JMAG-RT model used as a refe…

• Applications: Linear Solenoid / Linear Actuator
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT

DATAFile nameSize (KB)Application NoteJAC098SOLENOIDVALVE-RT-e.zip526Model DataJMAG-Designer 22.1MATLAB/Simulink R2021aJAC098SOLENOIDVALVE-RT-d.zip1,078Case

[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor

DATAFile nameSize (KB)Application NoteJAC099REACTOR-HighCurrent-inductance-e.zip539Model DataJMAG-Designer 11.0JAC099REACTOR-HighCurrent-inductance-d.zip13,071Case

[JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor

This Application Note presents how to obtain a high-current reactor’s superimposed direct current characteristics when the gap length is varied.

• Applications: Transformer / Reactor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC095] Analysis of a Universal Motor

DownloadFile nameSize (KB)Application NoteJAC095UNIVERSAL-e.zip0,64Model DataJMAG-Designer 12.0JAC095UNIVERSAL-d.zip1,28Case

[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor

DATAFile nameSize (KB)Application NoteJAC090IPM-RT-PWMloss-e.zip846Model DataJMAG-Designer 17.0JAC090IPM-RT-PWMloss-d.zip5,265Case

[JAC090] Analysis of the Effect of PWM on the Iron Loss of an IPM Motor

This Application Note demonstrates a case study where the effects of a carrier harmonic against an IPM motor’s iron loss is confirmed using estimated harmonic current waveform as …

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC095] Analysis of a Universal Motor

This note presents how the characteristics of a universal motor can be obtained, including torque versus current (T-I), torque versus speed (T-N), and magnetic flux density distri…

• Applications: Brush Motor / Universal Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC094] Analysis of Detent Torque of a PM Stepper Motor

This Application Note describes how the detent torque can be calculated for a PM stepper motor.

• Applications: Motor and Stepper Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC094] Analysis of Detent Torque of a PM Stepper Motor

DATAFile nameSize (KB)Application NoteJAC094PMSTEP-detent-e.zip599Model DataJMAG-Designer 12.0JAC094PMSTEP-detent-d.zip3,850Case

[JAC043] Torque Analysis of a Coreless Motor

This Application Note presents an evaluation of the torque waveform of a coreless motor when current is running.

• Applications: Coreless Motor and Motor
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC043] Torque Analysis of a Coreless Motor

DATAFile nameSize (KB)Application NoteJAC043CORELESS-Torque-e.zip870Model DataJMAG-Designer 12.0JAC043CORELESS-Torque-d.zip195Case

[JAC089] Stiffness Torque Analysis of a PM Stepper Motor

DATAFile nameSize (KB)Application NoteJAC089PMSTEP-stiffness-e.zip705Model DataJMAG-Designer 15.0JAC089PMSTEP-stiffness-d.zip8,260Case

[JAC089] Stiffness Torque Analysis of a PM Stepper Motor

This Application Note describes how the stiffness torque at 0.5 A of current can be calculated for a PM stepper motor.

• Applications: Motor and Stepper Motor
• Module: TR
• Physical Phenomena: Magnetic Field