Search results

[JAC091] Iron Loss Analysis of an IPM Motor Including the Effects of Press Fitting Stress

This Application Note presents modeling the press fitting of a core and frame with the Press Fit condition and then obtaining the iron loss density of an IPM motor with and withou…

• Applications: IPM Motor and Motor
• Module: DP, DS, and LS
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Multiphysics

[JAC103] Efficiency Analysis of a Permanent Magnet Synchronous Motor

In this example, how to obtain the efficiency with a sinusoidal wave voltage drive at a rotation speed of 1,800 r/min and voltage amplitude of 40 V.

• Applications: Motor and SPM Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field

[JAC102] Magnetic Field Analysis of a Magnetic Sensor

This Application Note presents how to obtain the magnetic flux density distribution at points in the horizontal and vertical directions away from the magnet.

• Applications: Sensor
• Module: ST
• Physical Phenomena: Magnetic Field

[JAC118] Thermal Analysis of a Bus Bar

DATAFile nameSize (KB)Application NoteJAC118BUSBAR-Thermal-e.zip792Model DataJMAG-Designer 12.0JAC118BUSBAR-Thermal-d.zip14,245Case

[JAC101] AL-value Current Characteristics Analysis of a Choke Coil

This note presents the use of a magnetic field analysis to obtain the AL-value current properties of a choke coil.

• Applications: Magnetic Component and Transformer / Reactor
• Module: ST and TRANSFORMER_TEMPLATE
• Physical Phenomena: Magnetic Field

[JAC104] Thrust Force Analysis of a Linear Induction Motor

DATAFile nameSize (KB)Application NoteJAC104LIM-e.zip400Model DataJMAG-Designer 12.0JAC104LIM-d.zip1,499Case

[JAC101] AL-value Current Characteristics Analysis of a Choke Coil

DATAFile nameSize (KB)Application NoteJAC101CHOKECOIL-AL-current-e.zip670Model DataJMAG-Designer 15.1JAC101CHOKECOIL-AL-current-d.zip6,131Case

[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

DATAFile nameSize (KB)Application NoteJAC048IH-Printer-e.zip800Model DataJMAG-Designer 12.0JAC048IH-Printer-d.zip2,155Case

[JAC100] Surface Heating Analysis of a Steel Plate

This Application Note presents how to confirm the uniformity of the surface temperature distribution in the steel plate facing the coil and check for an eddy current loss density …

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC104] Thrust Force Analysis of a Linear Induction Motor

This Application Note presents how to obtain thrust force characteristics for a linear inductance motor.

• Applications: Linear Motor and Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT

This note presents how JMAG-RT can be used to calculate attraction forces and coil inductance that varies with harmonic and current. The result is the JMAG-RT model used as a refe…

• Applications: Linear Solenoid / Linear Actuator
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC098] Response Analysis of a Solenoid Valve Using a Control Simulator and the JMAG-RT

DATAFile nameSize (KB)Application NoteJAC098SOLENOIDVALVE-RT-e.zip526Model DataJMAG-Designer 22.1MATLAB/Simulink R2021aJAC098SOLENOIDVALVE-RT-d.zip1,078Case

[JAC048] High-Frequency Induction Heating Analysis of a Printer Roller

This Application Note confirms the non-uniformity in temperature distribution produced by an assumed coil geometry, as well as the temperature elevation in each part caused by rot…

• Applications: Induction Heating
• Module: FQ and HT
• Physical Phenomena: Magnetic Field and Thermal
• Technical Themes: Multiphysics

[JAC099] Superimposed Direct Current Characteristics Analysis of a High Current Reactor

DATAFile nameSize (KB)Application NoteJAC099REACTOR-HighCurrent-inductance-e.zip539Model DataJMAG-Designer 11.0JAC099REACTOR-HighCurrent-inductance-d.zip13,071Case

[JAC100] Surface Heating Analysis of a Steel Plate

DATAFile nameSize (KB)Application NoteJAC100IH-Surfaceheating-e.zip899Model DataJMAG-Designer 12.0JAC100IH-Surfaceheating-d.zip7,177Case

[JAC059] Iron Loss Analysis of an IPM Motor Accounting for PWN -Direct Link-

In this analysis, the iron losses of the IPM motor that accounts for the carrier harmonic are obtained by directly linking to a circuit/control simulator.

• Applications: IPM Motor and Motor
• Module: DP and LS
• Physical Phenomena: Circuit / Control and Magnetic Field