Search results
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
[JAC219] Axial Gap Type Motor Cogging Torque Analysis
In this example, presents an example of cogging torque analysis of an axial gap type motor.
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
DATAFile nameSize (KB)Application NoteJAC293AXIAL-Optimization-SurrogateModel-e.zip833Model DataJMAG-Designer 25.1JAC293AXIAL-Optimization-SurrogateModel-d.zip11,484Case
-
[JAC303] Geometry Optimization of a Motor Considering Vibration at System-level
DATAFile nameSize (KB)Application NoteJAC303IPM-NVHOptimization-e.zip820Model DataJMAG-Designer 24.0JAC303IPM-NVHOptimization-d.zip20,684Case
-
[JAC293] Axial Gap Motor Geometry Optimization Using Surrogate Models
In this example, the dimensions of an axial gap motor are optimized by using surrogate models, then the Pareto curves and the effect of reduction in calculation times when using s…
-
[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress
In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…
-
[JAC303] Geometry Optimization of a Motor Considering Vibration at System-level
In this document, the dimensional optimization of a single motor is performed to minimize the vibration at the system level.
-
[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress
DATAFile nameSize (KB)Application NoteJAC294WFSM-MultipysicsEvaluation-e.pdf382Model DataJMAG-Designer 24.0JAC294WFSM-MultipysicsEvaluation-d.zip2,769Case
-
[JAC219] Axial Gap Type Motor Cogging Torque Analysis
DATAFile nameSize (KB)Application NoteJAC219AXIAL-Cogging-e.zip1,113Model DataJMAG-Designer 24.0JAC219AXIAL-Cogging-d.zip3,603Case
-
[JAC267] IPM Motor Topology Optimization Using the Density Method
Magnetic field and structural coupled analysis is run in this example. While accounting for rotor core strength, topology optimization that uses the density method is used to perf…
-
[JAC267] IPM Motor Topology Optimization Using the Density Method
DATAFile nameSize (KB)Application NoteJAC267IPM-TopologyOptDensity-e.zip802Model DataJMAG-Designer 22.2JAC267IPM-TopologyOptDensity-d.zip1,352Case
-
[JAC241] Single-Phase Synchronous Motor N-T-I Characteristics Analysis
In this example, a use case in which the N-T-I characteristics for a single-phase synchronous motor are obtained is presented.
-
[JAC241] Single-Phase Synchronous Motor N-T-I Characteristics Analysis
DATAFile nameSize (KB)Application NoteJAC241SinglePhaseSM-e.zip591Model DataJMAG-Designer 23.0JAC241SinglePhaseSM-d.zip383Case
-
[JAC298] Analysis of an SPM Motor Taking into Account the Effects of Layer Shorts
DATAFile nameSize (KB)Application NoteJAC298SPM-InterTurnShortLoss-e.zip1,070Model DataJMAG-Designer 22.2JAC298SPM-InterTurnShortLoss-d.zip1,467Case
-
[JAC298] Analysis of an SPM Motor Taking into Account the Effects of Layer Shorts
OverviewDeterioration in the coil insulation may cause a short circuit between adjacent coil layers (layer short). A short-circuit current flowing when the winding has a layer sho…
-
[JAC300] Electromagnetic Excitation Force Analysis of an SPM Motor with Step Skew
This case study runs a magnetic field analysis of an SPM motor with step skew to obtain the electromagnetic force acting on the teeth of the stator core to verify the electromagne…
-
[JAC299] Inverter Changeover Control for an Open-end Winding Motor (Wound-Field Synchronous Motor)
This case study runs a circuit simulation of an open-end winding motor drive system that switches from using a single inverter to dual inverters during operation in order to mitig…
