Search results

[JAC269] Creating Three-Phase Induction Motor Efficiency Maps Accounting for Harmonics

In this example, efficiency maps are created for a three-phase induction motor accounting for PWM carrier and slot harmonics. These are compared with efficiency maps when harmonic…

• Applications: Induction Motor and Motor
• Module: DP, FQ, and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency Map

[JAC284] Analysis of Minute Electromagnetic Forces Acting on a Magnet

DATAFile nameSize (KB)Model DataJMAG-Designer 21.1JAC284-MinuteElectromagneticForce-d.zip123Case

[JAC284] Analysis of Minute Electromagnetic Forces Acting on a Magnet

In this example, we obtain the minute electromagnetic forces acting on a magnet that is moving translationally.

• Applications: Magnet
• Module: TR
• Physical Phenomena: Magnetic Field

[JAC235] Reactor Core Stray Loss Analysis

DATAFile nameSize (KB)Application NoteJAC235REACTOR-StrayLoss-e.zip1,541Model DataJMAG-Designer 17.0JAC235REACTOR-StrayLoss-d.zip741Case

[JAC235] Reactor Core Stray Loss Analysis

In this example, reactor core stray loss is described.

• Applications: Magnetic Component and Transformer / Reactor
• Module: LS and TR
• Physical Phenomena: Magnetic Field

[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation

In this example, the optimum current phase that achieves high torque per each geometry is obtained, and the torque characteristics (1,000 r/min) and stress due to centrifugal forc…

• Applications: IPM Motor and Motor
• Module: DP and DS
• Physical Phenomena: Magnetic Field and Structural
• Technical Themes: Design Exploration / Optimization

[JAC223] Multi-Objective Optimization of an IPM Motor Accounting for Stress at High-Speed Rotation

DATAFile nameSize (KB)Application NoteJAC223IPM-Optimization-e.zip1,164Model DataJMAG-Designer 20.0JAC223IPM-Optimization-d.zip920Case

[JAC278] Creating Six-Phase Induction Motor Efficiency Maps

In this example, a six-phase induction motor efficiency map is created in the concept design stage, and each operating point slip and iron loss are evaluated.

• Applications: Induction Motor and Motor
• Module: FQ and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Efficiency Map

[JAC278] Creating Six-Phase Induction Motor Efficiency Maps

DATAFile nameSize (KB)Application NoteJAC278IM-EfficiencyMapSixPhase-e.zip697Model DataJMAG-Designer 21.0AC278IM-EfficiencyMapSixPhase-d.zip910Case

[JAC224] Wireless Power Transfer Device Stray Loss Analysis

DATAFile nameSize (KB)Application NoteJAC224WPT-StrayLoss-e.zip679Model DataJMAG-Designer 17.0JAC224WPT-StrayLoss-d.zip30,164Case

[JAC224] Wireless Power Transfer Device Stray Loss Analysis

In this example, an example is presented investigating by using electromagnetic field analysis whether stray loss can be suppressed using an aluminum shield.

• Applications: Wireless Power Transfer
• Module: FQ
• Physical Phenomena: Magnetic Field

[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor

DATAFile nameSize (KB)Application NoteJAC213WFSM-RT-e.zip1,050Model DataJMAG-Designer 17.0MATLAB/Simulink 2016bJAC213WFSM-RT-d.zip4,152Case

[JAC213] Circuit/Control Simulation of a Wound-Field Synchronous Motor

In this example, JMAG-RT is used to obtain the torque of a wound-field synchronous motor (below WFSM) and the coil inductance current dependence, and the spatial harmonic componen…

• Applications: Motor and Wound-Field Synchronous Motor
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC268] SPM Motor Teeth Geometry Topology Optimization

In this example, the on / off method is used to search for stator teeth geometry that maximizes average torque and minimizes torque ripple with the entire areas of stator teeth ti…

• Applications: Motor and SPM Motor
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC268] SPM Motor Teeth Geometry Topology Optimization

DATAFile nameSize (KB)Application Note JAC268SPM-TopologyOptNGnet-e.zip723Model DataJMAG-Designer 20.2JAC268SPM-TopologyOptNGnet-d.zip681Case

[JAC209] Magnetic Measurement Analysis Accounting for Eddy Currents

DATAFile nameSize (KB)Application NoteJAC209PPT-Measure-e.zip733Model DataJMAG-Designer 13.1JAC209PPT-Measure-d.zip872Case