Search results

[JAC253] Analysis of an Induction Generator

In this example, the relationship between the output power and efficiency of the induction generator is shown here.

• Applications: Generator
• Module: DP
• Physical Phenomena: Magnetic Field

[JAC126] Magnetization Analysis Accounting for Eddy Currents

DATAFile nameSize (KB)Application NoteJAC126MAG-Eddy-e.zip843Model DataJMAG-Designer 21.2JAC126MAG-Eddy-d.zip4,404Case

[JAC126] Magnetization Analysis Accounting for Eddy Currents

This Application Note presents how to obtain the magnetization field distribution accounting for eddy currents in the magnetic material to be magnetized, the eddy current density …

• Applications: Magnet
• Module: ST and TR
• Physical Phenomena: Magnetic Field and Material

[JAC288] Synchronous Reluctance Motor Topology Optimization

DATAFile nameSize (KB)Model DataJMAG-Designer 22.1JAC288SynRM-TopologyOptimization-d.zip1,555Case

[JAC288] Synchronous Reluctance Motor Topology Optimization

In this example, topology optimization is used to minimize the torque ripple and maximize the average torque when exploring the rotor geometry.

• Applications: Motor and Synchronous Reluctance Motor
• Module: DP
• Physical Phenomena: Magnetic Field
• Technical Themes: Design Exploration / Optimization

[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT

DATAFile nameSize (KB)Model DataJMAG-Designer 22.1JAC216ALTERNATOR-RT-d.zip2,774Case

[JAC216] Simulation of a Claw-Pole Type Alternator Using a Control Simulator and JMAG-RT

In this example, the output voltage and field current of a claw-pole type alternator is checked when the rotor speed is changed.

• Applications: Generator
• Module: RT and TR
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC227] Circuit Control Simulation for Three-Phase Induction Motor

DATAFile nameSize (KB)Model DataJMAG-Designer 22.1JAC227IM-RT-d.zip2,155Case

[JAC214] Monitoring the Radial Force Acting on the Teeth of IPM Motors Using Circuit Control Simulation

In this example, an IPM motor as a JMAG-RT model is captured in a control/circuit simulator, and radial forces acting on the teeth during motor driving is monitored while changing…

• Applications: IPM Motor and Motor
• Module: DP and RT
• Physical Phenomena: Circuit / Control and Magnetic Field
• Technical Themes: MBD

[JAC162] Drive Simulation of an SR Motor using a Control Simulator and JMAG-RT

DATAFile nameSize (KB)Application NoteJAC162SRM-RT-e.zip712Model DataJMAG-Designer 22.1MATLAB/Simulink R2021aJAC162SRM-RT-d.zip1,245Case

[JAC037] Vector Control Analysis of an IPM Motor Using Control Simulator and the JMAG-RT

DATAFile nameSize (KB)Application NoteJAC037IPM-RT-e.zip1,471Model DataJMAG-Designer 22.1MATLAB/Simulink 2021aJAC037IPM-RT-d.zip2,973Case

[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM

In this example, we determine the motor efficiency in relation to the field current for a WFSM when the motor output is kept constant.

• Applications: Motor and Wound-Field Synchronous Motor
• Module: DP and LS
• Physical Phenomena: Magnetic Field
• Technical Themes: Material Modeling / Loss Analysis

[JAC287] Analysis of Current Conditions for the Maximum Efficiency of a WFSM

DATAFile nameSize (KB)Model DataJMAG-Designer 21.2JAC287WFSM-Efficiency-d.zip1,891Case

[JAC134] Speed Control Analysis of a Permanent Magnet Linear Motor Using the Control Simulator and the JMAG-RT

DATAFile nameSize (KB)Application NoteJAC134LSM-RT-Simulink-e.zip552Model DataJMAG-Designer 22.1MATLAB/Simulink R2021aJAC134LSM-RT-Simulink-d.zip2,189Case

[JAC239] Fault Analysis in an IPM Motor

DATAFile nameSize (KB)Model DataJMAG-Designer 22.1JAC239IPM-RT-Fault-d.zip3,946Case

[JAC243] Voice Coil Motor Control Simulation Using a Control Simulator and JMAG-RT

DATAFile nameSize (KB)Application NoteJAC243VCM-RT-e.zip444Model DataJMAG-Designer 22.1MATLAB/Simulink 2021aJAC243VCM-RT-d.zip981Case