Current Distribution Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
Show 1 to 12 of 12
-
[L-SE-59] Detailed Modeling for Harmonic Loss Analysis
In IPM motors driven by PWM inverters, eddy current losses occur due to carrier higher harmonics. For higher efficiency, it is important to evaluate higher harmonic loss at design…
-
[L-MO-09] Easily Creating Complex Coil Ends Geometry in a Template
The introduction of square wire coils and higher motor speeds no longer allow coil AC losses to be ignored as a loss factor. Coil AC losses are caused by the skin effect and prox…
-
[JAC235] Reactor Core Stray Loss Analysis
In this example, reactor core stray loss is described.
-
[JAC211] IPM Motor Wire Joule Loss Analysis
In this example, evaluation of coil joule loss that includes eddy currents during motor rotation is introduced here.
-
[L-HU-08] Complex 3D Models to FEA Models Within Short Timeframes
Amounts of processing required will increase proportionately to the number of parts. By applying parallel processing, mesher processing speed increases, and mesh generation time i…
-
[JAC237] AC Loss Analysis of an IPM Motor
In this example, we introduce the case study that evaluates AC losses in coils of an IPM motor.
-
[JAC232] Reactor Joule Loss Analysis
In this example, investigating Joule loss with respect to the positions of air gaps in a reactor is presented.
-
[JAC194] Analysis of High-Speed Rotation Motors Accounting for Eddy Current
Here we discuss the steps for accounting for eddy current loss occurring in the magnetic steel sheets during a magnetic field analysis, and then analyze the effects on torque.
-
[JAC185] Analysis of Stray Loss in a Power Transformer
This note obtains loss distribution for each component in drive condition and checks local overheating.
-
[JAC183] Agitation Force Analysis of an Induction Furnace
This analysis will evaluate the size of Lorentz force required to agitate and where this is generated.
-
[JAC140] Analysis of Electromagnetic Repulsion Produced in Small Contact Bridges
This Application Note presents the use of a magnetic field analysis to obtain the electromagnetic repulsion when a switch is closed, creating a contact bridge.
-
[JAC061] Current Distribution Analysis of a Choke Coil
This Application Note explains a case example that obtains the current distribution in a choke coil.
Show 1 to 12 of 12