Temperature Distribution Analysis
- Sort condition
- Newest first
- Oldest first
- Large number of views
-
Thermal Analysis of Traction Motors Using JMAG: A Case Study and Future Perspectives
Victor Rosa, Magna Powertrain
-
Design And Simulation Of High-Performance Permanent Magnet Synchronous Machines for Next Generation of Systems
Bulent Sarlioglu, University of Wisconsin-Madison
-
Optimization and High-precision Modeling of Permanent Magnet-free Motors
Daisuke Sato, Nagaoka Motor Development Co., Ltd.
-
Topology Optimization of Induction-Coil for Steel Strip Heating
Masato Taira, NIPPON STEEL CORPORATION
-
[JAC294] Design Exploration of Wound-Field Synchronous Motors, Including Evaluating Part Temperature and Stress
In this example, the efficiency map, part temperature, and stress, are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explo…
-
[JAC290] Design Exploration of IPM Motors, Including Evaluating Part Temperature and Stress
In this example, the part temperature and stress are evaluated at the same time for the motor design plan, and a design plan that meets the requirements is explored.
-
[JAC186] Gear Induction Hardening Analysis Using Two Frequencies
In this material, the validity of coil geometry used for quenching is evaluated by heating the gear top and bottom at high and low frequencies, respectively, to confirm uniform te…
-
[JAC296] Torque Characteristic Analysis of an IPM Motor Accounting for Temperature Distribution and Changes in Temperature
In this example, magnetic field and thermal coupled analysis is run, and changes in torque due to part temperatures and magnet demagnetization are checked.
-
[JAC297] Geometry Optimization of a Wound-field Synchronous Motor Including Efficiency Map, Part Temperature, and Stress Evaluations
This case study runs a parametric optimization of a main automotive engine to maximize efficiency and torque while minimizing the temperature and stress as constraint conditions.
-
Coupled Analysis of Induction Motor using JMAG-Express
Ryuki Haruna, TEIKOKU ELECTRIC MFG. CO., LTD.
-
Thermal Problem of the 200kW Class High-Speed Rotation Axial Gap Motor Applied to the Uniaxial Electric Pump for the Cryogenic Propellant Supply of the 30…
Mitsuru Shimagaki, Japan Aerospace Exploration Agency
-
Initiatives in Induction Hardening Simulation by coupling JMAG and Simufact
Ippei Ohnuma, NDK Inc.
-
Optimizing Motor Shrink Fitting Process Conditions using Induction Heating
Keisuke Ando, NIPPON THERMONICS CO.,LTD
-
Analysis of Electromagnetic Force Acting on a Workpiece During Induction Heating
Go Hagimoto, NSK Ltd.
-
[JAC010] Thermal Analysis of a Radiant Heater
This Application Note explains how to carry out a thermal analysis using the thermal radiation phenomenon between a heater and a heated body to obtain the differences in temperatu…
-
[JAC279] Thermal Analysis Accounting for Cooling of the IPM Motor
In this example, thermal equivalent circuit is used to run thermal analysis of a 3-phase IPM motor that accounts for cooling, and check the temperature change in the coil.
